Laser Shifter Install
#26
Thread Starter
Super Member
Joined: May 2006
Posts: 872
Likes: 2
From: Saint Louis
CLS 63 S AMG , s500,clk550
sry guys for being a bit late on this install, i had to go visit family for the holidays and there on the west coast and im missouri
okay so i got under the hood today and i started looking for the firewall openings, but there is a fusebox blocking the one from the drivers side.
i would appreciate if someone could tell me exactly what to do to get to the openings, or some directions on how to properly get pass the fusebox
i also took a look on the passengers side and i could barely see the passthrough, but it was blocked by a rubber pipe.
also
for the on/off switch of install equipment is there way to send that control switch to the middle console like where the esp and unlock/lock switches are?
thanx
okay so i got under the hood today and i started looking for the firewall openings, but there is a fusebox blocking the one from the drivers side.
i would appreciate if someone could tell me exactly what to do to get to the openings, or some directions on how to properly get pass the fusebox
i also took a look on the passengers side and i could barely see the passthrough, but it was blocked by a rubber pipe.
also
for the on/off switch of install equipment is there way to send that control switch to the middle console like where the esp and unlock/lock switches are?
thanx
#28
Thread Starter
Super Member
Joined: May 2006
Posts: 872
Likes: 2
From: Saint Louis
CLS 63 S AMG , s500,clk550
#29
Super Member
Joined: May 2010
Posts: 766
Likes: 8
From: Las Vegas, NV
2012 CLS 550 Launch Edition, 2004 CLK 500, 2004 Honda Civic
Yeah maybe I should've read the first page...
Post pics when you get it up and running and how it works...
Good luck!...
Angelo
Post pics when you get it up and running and how it works...
Good luck!...
Angelo
Last edited by Newjd2; 01-07-2011 at 10:23 AM.
#30
MBWorld Fanatic!
Joined: May 2008
Posts: 1,238
Likes: 17
From: Los Angeles, CA
Supercharged CLK500 & ML500
sry guys for being a bit late on this install, i had to go visit family for the holidays and there on the west coast and im missouri
okay so i got under the hood today and i started looking for the firewall openings, but there is a fusebox blocking the one from the drivers side.
i would appreciate if someone could tell me exactly what to do to get to the openings, or some directions on how to properly get pass the fusebox
i also took a look on the passengers side and i could barely see the passthrough, but it was blocked by a rubber pipe.
also
for the on/off switch of install equipment is there way to send that control switch to the middle console like where the esp and unlock/lock switches are?
thanx
okay so i got under the hood today and i started looking for the firewall openings, but there is a fusebox blocking the one from the drivers side.
i would appreciate if someone could tell me exactly what to do to get to the openings, or some directions on how to properly get pass the fusebox
i also took a look on the passengers side and i could barely see the passthrough, but it was blocked by a rubber pipe.
also
for the on/off switch of install equipment is there way to send that control switch to the middle console like where the esp and unlock/lock switches are?
thanx
#31
Thread Starter
Super Member
Joined: May 2006
Posts: 872
Likes: 2
From: Saint Louis
CLS 63 S AMG , s500,clk550
#32