Quote:
Haha there you goOriginally Posted by dynomite05
Ohh lol. It's 315Nm and about 230tq.

Man I need a new car

Should have bought the 500 when I had the chance

Out Of Control!!
I ran the part # for the center impact absorber and it looks like all W209s share the same absorbers. I also confirmed this for the left and right absorbers.


Quote:
GreatOriginally Posted by dynomite05
I ran the part # for the center impact absorber and it looks like all W209s share the same absorbers. I also confirmed this for the left and right absorbers.
Thanks Wes! I Appreciate itI will be contacting you soon regarding fog lights and grill mesh for the bumper

BMW 630i:
With 258bhp on tap, it could be a little disappointing in a straight line, but it really isn’t. BMW has reworked its technology to give 200lb-ft of torque from 1,500rpm and have raised the three-litre's rev limit to 7,000rpm, to give it enough oomph to keep things entertaining. Peak torque remains at 221lb-ft and that comes at 6,600rpm, but some people will always enjoy wringing the last few revs if only for the fun of it.
Mine's got 230lb-ft
with a ecu tune and new exhaust I could probably end up with 240-250HP/330-340nm. But I would still loose right?
With 258bhp on tap, it could be a little disappointing in a straight line, but it really isn’t. BMW has reworked its technology to give 200lb-ft of torque from 1,500rpm and have raised the three-litre's rev limit to 7,000rpm, to give it enough oomph to keep things entertaining. Peak torque remains at 221lb-ft and that comes at 6,600rpm, but some people will always enjoy wringing the last few revs if only for the fun of it.
Mine's got 230lb-ft
with a ecu tune and new exhaust I could probably end up with 240-250HP/330-340nm. But I would still loose right?
MBWorld Fanatic!
Kevwood
MBWorld Fanatic!
close
- Join DateJul 2010
- LocationA Canadian in Dubai, United Arab Emirates
- Posts:4,748
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
-
Likes:0
-
Liked:0 Times in 0 Posts
Quote:
With 258bhp on tap, it could be a little disappointing in a straight line, but it really isn’t. BMW has reworked its technology to give 200lb-ft of torque from 1,500rpm and have raised the three-litre's rev limit to 7,000rpm, to give it enough oomph to keep things entertaining. Peak torque remains at 221lb-ft and that comes at 6,600rpm, but some people will always enjoy wringing the last few revs if only for the fun of it.
Mine's got 230lb-ft
with a ecu tune and new exhaust I could probably end up with 240-250HP/330-340nm. But I would still loose right?
I jut looked it up and it was right where I thought it was, 272HP. Like I said, I've been in my friends and it's pretty quick, I think it would match up really well to the C350. I've never raced a 630i vs a CLK320 so I certainly don't know the actual outcome but from driving a C350 and driving in a 630i, I have no doubt it would take you with relative ease.Originally Posted by mikata
BMW 630i:With 258bhp on tap, it could be a little disappointing in a straight line, but it really isn’t. BMW has reworked its technology to give 200lb-ft of torque from 1,500rpm and have raised the three-litre's rev limit to 7,000rpm, to give it enough oomph to keep things entertaining. Peak torque remains at 221lb-ft and that comes at 6,600rpm, but some people will always enjoy wringing the last few revs if only for the fun of it.
Mine's got 230lb-ft
with a ecu tune and new exhaust I could probably end up with 240-250HP/330-340nm. But I would still loose right?
Race him and find out, we'd all like to hear about it. Battle of the sixes...
Haha:-) He's car is a 2006 with 258HP. It's 100KG heavier. I got more torque and lighter car. With a ecu tune and new exhaust maybe I got chance? Well, we'll find out this summer

Quote:
Have you looked on ebay.es? The shipping cost to Spain from example germany would cost alot.Originally Posted by Nando87
I'm searching for a post facelift AMG front bumper in europe too...
I got the amg rear bumper today. There was a 4 inch crack i the bumper (looks like easy fix). The auction clearly said it was all intact just that it needed to be repainted.
The seller is a great guy, I bought the side skirts from him that were in great condition.
What should I do, just fix the crack with some filler or open a dispute on paypal if the seller doesn't want to acknowledge the damage?
As I feel of right now I don't have the enegry to argue about it, I'm just glad I got a amg bumper but still...
What do you guys think?

Out Of Control!!
Take some pics and send them to the seller. It will be a PITA to send the bumper back for a refund so just ask if he could refund you some money to get it fixed.
Quote:
Yeah I know. I was thinking of sending him some pics. Man I just don't have the energy to claim a refund now that I got the amg bumper. But then again the auction said intact bumper..Originally Posted by dynomite05
Take some pics and send them to the seller. It will be a PITA to send the bumper back for a refund so just ask if he could refund you some money to get it fixed.
I've sent him an email. We'll see if he respons. Probably not..
Quote:
Thanks broOriginally Posted by dynomite05
Good Luck!

MBWorld Fanatic!
so lemme get this straight. for the amg kit, i'll just need the front/rear bumpers, side skirt, mesh and fogs? i dont need the absorbers right...and do i need new fogs?
Quote:
Yep, just new fogsOriginally Posted by bheng
so lemme get this straight. for the amg kit, i'll just need the front/rear bumpers, side skirt, mesh and fogs? i dont need the absorbers right...and do i need new fogs?
The current absorbers fit.Junior Member
"Else getting the pre-facelift bumper with CF lip, and Projector Fogs would cost less"
I like the sound of that! "Cost less"
Where are you shopping? Please share
I like the sound of that! "Cost less"
Where are you shopping? Please share

Member
Quote:
I got the amg rear bumper today. There was a 4 inch crack i the bumper (looks like easy fix). The auction clearly said it was all intact just that it needed to be repainted.
The seller is a great guy, I bought the side skirts from him that were in great condition.
What should I do, just fix the crack with some filler or open a dispute on paypal if the seller doesn't want to acknowledge the damage?
As I feel of right now I don't have the enegry to argue about it, I'm just glad I got a amg bumper but still...
What do you guys think?
I would want to have my money back if the bumper is broken and the advertise didn't specify it...Originally Posted by mikata
Have you looked on ebay.es? The shipping cost to Spain from example germany would cost alot.I got the amg rear bumper today. There was a 4 inch crack i the bumper (looks like easy fix). The auction clearly said it was all intact just that it needed to be repainted.
The seller is a great guy, I bought the side skirts from him that were in great condition.
What should I do, just fix the crack with some filler or open a dispute on paypal if the seller doesn't want to acknowledge the damage?
As I feel of right now I don't have the enegry to argue about it, I'm just glad I got a amg bumper but still...
What do you guys think?
Shipping costs from germany to spain are not more than 35-50 €. But there are not a lot of facelift bumpers for sale
Quote:
Shipping costs from germany to spain are not more than 35-50 €. But there are not a lot of facelifted bumpers for sale
Yeah I know, feel the same way but I was going to repaint it either way so little filler won't hurt.Originally Posted by Nando87
I would want to have my money back if the bumper is broken and the advertise didn't specify it...Shipping costs from germany to spain are not more than 35-50 €. But there are not a lot of facelifted bumpers for sale
I have waited and wanting to buy the amg package for a while so this is just a little set back

Hey guys,
Do you if it's possible to buy the little square plastic part on the bumper, marked in the picture.
I want to buy this bumper but it's missing that part.
Are there any part numbers for this part?
Thanks!
Do you if it's possible to buy the little square plastic part on the bumper, marked in the picture.
I want to buy this bumper but it's missing that part.
Are there any part numbers for this part?
Thanks!
Quote:
Do you if it's possible to buy the little square plastic part on the bumper, marked in the picture.
I want to buy this bumper but it's missing that part.
Are there any part numbers for this part?
Thanks!
Bump. Can anyone help me?Originally Posted by mikata
Hey guys,Do you if it's possible to buy the little square plastic part on the bumper, marked in the picture.
I want to buy this bumper but it's missing that part.
Are there any part numbers for this part?
Thanks!
Quote:
Thanks a bunch Wes!Originally Posted by dynomite05
I will check, give me a few

