CLK will not start!! HELP!
#1
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
CLK will not start!! HELP!
So this is my wife's car. She had an issue with it this morning where she was driving it and all of a sudden the car died and all the lights on the instrument panel came on. When she tried to turn the key you can hear it try to start the engine (click, click, click, click, etc) but the engine does not turn over. By the way, it is a 2006 CLK500
She managed to get it going by doing that several times this morning. I figured it was the batteries being low on the key (keyless go also) since the car had been reporting low battery on the key for a while now. She got home tonight after the car nearly stalled again on the road, I replaced the batteries and now the car will not start again.
Any ideas what is going on??
She managed to get it going by doing that several times this morning. I figured it was the batteries being low on the key (keyless go also) since the car had been reporting low battery on the key for a while now. She got home tonight after the car nearly stalled again on the road, I replaced the batteries and now the car will not start again.
Any ideas what is going on??
Last edited by mig1980; 04-05-2011 at 11:18 PM.
#2
same shhhhh happened to me man i am pist i was driving all day i came home car dies i took it to the mechanic there going to tell me in the morning what is wrong with it right now my only clue is i think i blue my trans... not sure at least yours started back up mine did not i had all light on dash also did any mechanical message come up. i also had power because i could here my speaker but it kept rolling back i had to put the e brake damn i am m ad this is my baby and we have to take care of these cars more since they are so expensive so i am clueless till tomorrow i hope it is not expensive
#3
MBWorld Fanatic!
So this is my wife's car. She had an issue with it this morning where she was driving it and all of a sudden the car died and all the lights on the instrument panel came on. When she tried to turn the key you can hear it try to start the engine (click, click, click, click, etc) but the engine does not turn over. By the way, it is a 2006 CLK500
She managed to get it going by doing that several times this morning. I figured it was the batteries being low on the key (keyless go also) since the car had been reporting low battery on the key for a while now. She got home tonight after the car nearly stalled again on the road, I replaced the batteries and now the car will not start again.
Any ideas what is going on??
She managed to get it going by doing that several times this morning. I figured it was the batteries being low on the key (keyless go also) since the car had been reporting low battery on the key for a while now. She got home tonight after the car nearly stalled again on the road, I replaced the batteries and now the car will not start again.
Any ideas what is going on??
If the car just died while driving, sound like the crank position sensor. It a $20-$30 part and you can replace it yourself.
Last edited by Klinh; 04-06-2011 at 12:42 AM.
The following users liked this post:
jwb007 (08-11-2019)
#4
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
It did die while driving once this morning. She was able to make it back home (she told me it started acting up and she felt lack of power at higher speeds after she left work but she said she drove it during lunch and it functioned fine) and as of an hour ago I wasn't able to have the engine start. Do you think it is the crank position sensor? It sounded like a sensor issue to me as well when the wife told me.
The wife did mention that she had a check engine light after the car started when it died on her on the road in the AM.
The wife did mention that she had a check engine light after the car started when it died on her on the road in the AM.
Last edited by mig1980; 04-06-2011 at 02:02 AM.
#5
MBWorld Fanatic!
It did die while driving once this morning. She was able to make it back home (she told me it started acting up and she felt lack of power at higher speeds after she left work but she said she drove it during lunch and it functioned fine) and as of an hour ago I wasn't able to have the engine start. Do you think it is the crank position sensor? It sounded like a sensor issue to me as well when the wife told me.
The wife did mention that she had a check engine light after the car started when it died on her on the road in the AM.
The wife did mention that she had a check engine light after the car started when it died on her on the road in the AM.
My guess..........it is the position crank sensor.
#6
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
where can I purchase this part from? Also, where can a buy a good code reader? Would the code reader for the CLK be the same as for my corvette or my SL55? I really need to buy one to have at the house.
Last edited by mig1980; 04-06-2011 at 02:17 AM.
Trending Topics
#8
Super Member
Join Date: Mar 2009
Location: Orlando, FL.
Posts: 725
Likes: 0
Received 1 Like
on
1 Post
2005 CLK500
same shhhhh happened to me man i am pist i was driving all day i came home car dies i took it to the mechanic there going to tell me in the morning what is wrong with it right now my only clue is i think i blue my trans... not sure at least yours started back up mine did not i had all light on dash also did any mechanical message come up. i also had power because i could here my speaker but it kept rolling back i had to put the e brake damn i am m ad this is my baby and we have to take care of these cars more since they are so expensive so i am clueless till tomorrow i hope it is not expensive
#10
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
Any idea where to get the best price on it and where to pickup a code reader? Also, will a code reader for this car work for my SL55 and Corvette?
#12
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
but can someone tell me of a good code reader? Also, what is the best/cheapest place to pick up an OEM sensor online? Also, is the code reader required for this car an ODBII?
Last edited by mig1980; 04-06-2011 at 11:23 AM.
#14
#15
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
can someone tell me of a good code reader? Also, what is the best/cheapest place to pick up an OEM sensor online? Also, is the code reader required for this car an ODBII?
#17
MBWorld Fanatic!
Join Date: Jun 2009
Location: Witness Protection Program
Posts: 1,314
Likes: 0
Received 1 Like
on
1 Post
06 CLK350 -SOLD! 2010 Cadillac SRX Premium Turbo
This is the brand I have used at the auto parts store in the past when a code was thrown on the ML I owned. There may be a cheap model that does the same thing. Just FYI
http://www.amazon.com/Actron-CP9175-.../dp/B000FJS8O6
http://www.amazon.com/Actron-CP9175-.../dp/B000FJS8O6
#18
Super Member
Join Date: Mar 2009
Location: Orlando, FL.
Posts: 725
Likes: 0
Received 1 Like
on
1 Post
2005 CLK500
oh and this too. www.google.com
#19
so found out what it was a linkage from the shifter broke so the car still believes it is in drive nothing to major he told me it can be done today other than that another sensor broke but it was not the crank position sensor in my case i really thought it was going to be expensive but hopefully not cause i am still under warranty.. cant wait to get my baby back thanks for the knowledge guys
#25
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Rocklin, CA
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
2003 SL55, 2006 CLK500, 1998 Vette
So I pulled the codes on the car and it gave me a code for the Crankshaft position sensor. I order it for about $50 and will be installing it next week.