billyhead1

So, it looks like the washer bottle (or the pump) is leaking - has anyone else experienced this? Did you DIY, and what were the costs? Looks like I will have to pull the fender liner...

Any thoughts or tips appreciated!

~ Bill

Rudeney

Yes, you have to remove the fender liner to get to this. It's easiest if you jack the vehicle and remove the tire, but it can be done by turning the wheel all the way to the right. A common leak is the rubber grommet that seals the pump where it is inserted into the tank. In my case, the pump itself was leaking. The good news is the parts are very inexpensive. i think I got the pump and grommet both for around $35.

billyhead1

Thanks Rodney, I will check it out...