Convertible sensor in trunk - Page 2

Aug 21, 2017 | 06:16 AM

#26

Lovetoflyfish

Junior Member

Joined: Oct 2012

Posts: 45

Likes: 1

From: Prospect (Louisville), KY

'08 CLK 550 Cabriolet, '15 ML 350

[B]Additional thoughts...[B]

Quote:

Originally Posted by BK627

I changed the struts. I bought the car like this. There's too big of a gap from the cargo cover and the switch. There might be a piece missing or something is broken can someone take a picture of theirs so I can compare

Two issues, outside of the struts were causing problems with my partition properly contacting and holding the switch.

The wiring was getting in the way. - Try shoving the wiring down that tunnel for a while until it trains itself to stay out of the way or do what Yidney did (see post #56 w/in "Broken trunk partition CLK 320")

Confirm that the partition hinge pins are in place. - My drivers/switch side was missing so the partition was out of alignment.
(see further down that same thread)

Good luck

Reply Subscribe

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)