SRS problem
MBworld Guru
Joined: Dec 2009
Posts: 10,782
Likes: 1,011
NO LONGER ACTIVE
Welcome to the forum! Please take a moment to visit the User Control Panel and update your profile to include your car model and year, and your location (at least country). This information will then appear below your name and avatar on the left side panel next to each post you make. This will greatly help others to give you better information. If you are using the mobile version of the site, you will need to switch to the "full" version to get to the User Control Panel.
Here's the description:
9182 The resistance value in the ignition circuit containing component R12/1 (Driver ETR ignition squib) is too low. Note: On vehicles with special equipment 'PRE-SAFE', component R46 (Driver buckle ETR squib) is installed instead of component R12/1 (Driver ETR ignition squib).
Here's the description:
9182 The resistance value in the ignition circuit containing component R12/1 (Driver ETR ignition squib) is too low. Note: On vehicles with special equipment 'PRE-SAFE', component R46 (Driver buckle ETR squib) is installed instead of component R12/1 (Driver ETR ignition squib).
