TOP - Visit Workshop, but it still works
Thread Starter
MBWorld Fanatic!
Joined: Apr 2003
Posts: 1,036
Likes: 277
From: Northeast
2012 S350 Bluetec, 2014 GLK250 Bluetec, 2026 E350 4Matic
TOP - Visit Workshop, but it still works
Hi All,
I just replaced the main lift cylinder on the passenger side with one from Top Hydraulics and put everything back togehter. Now, sometimes when I open or close the top, I get "TOP - Visit Workshop" while it is opening or closing, but it appears to work normally. I hooked up a scan tool and don't see anything that seems related to the top. Any ideas on this? I've opened and closed the top about 20 times, and maybe 18 of those times, I get the error. Every time, it has opened or closed fully, ending in the "Open" or "Closed" message.
I just replaced the main lift cylinder on the passenger side with one from Top Hydraulics and put everything back togehter. Now, sometimes when I open or close the top, I get "TOP - Visit Workshop" while it is opening or closing, but it appears to work normally. I hooked up a scan tool and don't see anything that seems related to the top. Any ideas on this? I've opened and closed the top about 20 times, and maybe 18 of those times, I get the error. Every time, it has opened or closed fully, ending in the "Open" or "Closed" message.
