CLK 55 AMG No Start/ Fans running on high.
Water damage to ECM and Front Sam assembly: Replaced Front SAM with new unit. Replaced ECM with used Cloned ECM. / No error messages for ECM: Scan shows error message for TCM / Trans Error Reads: One or more Messages from ECM Unit not available on the CAN Bus. / TCM Replaced. Same error message: Ohms checked at ECM, TCM and EIS / All read 60 Ohms / Voltage checked at ECM, TCM and EIS / All read 2.43 high & 2.18 low side. Grounds have been checked all fuses checked (both Sams) No short to ground or short to voltage at TCM. All wires and fuses checked for damage. I DON’T KNOW WHAT TO CHECK NEXT? ANY SUGGESTIONS? Thanks in advance.
Water damage to ECM and Front Sam assembly: Replaced Front SAM with new unit. Replaced ECM with used Cloned ECM. / No error messages for ECM: Scan shows error message for TCM / Trans Error Reads: One or more Messages from ECM Unit not available on the CAN Bus. / TCM Replaced. Same error message: Ohms checked at ECM, TCM and EIS / All read 60 Ohms / Voltage checked at ECM, TCM and EIS / All read 2.43 high & 2.18 low side. Grounds have been checked all fuses checked (both Sams) No short to ground or short to voltage at TCM. All wires and fuses checked for damage. I DON’T KNOW WHAT TO CHECK NEXT? ANY SUGGESTIONS? Thanks in advance.
