Kleemann Header review
#26
MBWorld Fanatic!
Originally Posted by PTE
I'm doing the work myself . I got all the special tools. And can get you the part numbers & tool prices. I think it is time to start a new thread
Then you can take the lead and startup a new thread, you have my permission
#27
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
cam install tool prices
Ok < Here is what I have. $4100.00 for cams & Kit
Here is the tool list
Snap-on P/N oexm-270 $67.00 end wrench 27mm
swm 271-m $20.00 27mm shallow socket
210afley $89.00 Torx socket set
Try E-Bay for snap-on tools
www.elpasotools.com #B112-0001K $36.00
Mercedes camshaft alignment kit, M-113 eng
Mercedes Dealer
a912 589-01-03-00 E-18 wrench $76.05
a210-589-01-16-00 Adapter $64.35
Here is the tool list
Snap-on P/N oexm-270 $67.00 end wrench 27mm
swm 271-m $20.00 27mm shallow socket
210afley $89.00 Torx socket set
Try E-Bay for snap-on tools
www.elpasotools.com #B112-0001K $36.00
Mercedes camshaft alignment kit, M-113 eng
Mercedes Dealer
a912 589-01-03-00 E-18 wrench $76.05
a210-589-01-16-00 Adapter $64.35
#28
MBWorld Fanatic!
Originally Posted by PTE
Ok < Here is what I have. $4100.00 for cams & Kit
Here is the tool list
Snap-on P/N oexm-270 $67.00 end wrench 27mm
swm 271-m $20.00 27mm shallow socket
210afley $89.00 Torx socket set
Try E-Bay for snap-on tools
www.elpasotools.com #B112-0001K $36.00
Mercedes camshaft alignment kit, M-113 eng
Mercedes Dealer
a912 589-01-03-00 E-18 wrench $76.05
a210-589-01-16-00 Adapter $64.35
Here is the tool list
Snap-on P/N oexm-270 $67.00 end wrench 27mm
swm 271-m $20.00 27mm shallow socket
210afley $89.00 Torx socket set
Try E-Bay for snap-on tools
www.elpasotools.com #B112-0001K $36.00
Mercedes camshaft alignment kit, M-113 eng
Mercedes Dealer
a912 589-01-03-00 E-18 wrench $76.05
a210-589-01-16-00 Adapter $64.35
The cams must cost about in the 3k range right? I'm also surprised u didnt go HPS F/I. However,I am so curious to see your results!
#29
Out Of Control!
Originally Posted by PTE
I'will post some pictures. Coil paks & Valve covers are removed along with some other small parts. Cam position sensor . Cam chain tensioner, Cam sprockets , 20 bolts that hold the rocker assy on the head. But not the cyl head itself. You will notice the nice roller rocker arms