Are the brakes between a CLK55 same as CLK63
#51
Super Member
Joined: Sep 2011
Posts: 704
Likes: 3
From: Lebanon & Nigeria
W209 CLK55 AMG Kompressor, ATV BRP 800 CAN-AM
PLEASE HELP !!!
Please Help ! The pictures are attached in my previous post,i need to know if they are for the 05-06 clk55,so i can buy them and put them on my 04 clk55. Thanks
#52
#54
Super Member
Joined: Jan 2011
Posts: 512
Likes: 11
From: Houston, TX
W209 CLK Renntech Widebody, C140 CL600 V12, AP2 S2000, NSX Twin Turbo, R8 V10
Does any one know if there is a decently priced replacement rotor for the CLK63 brakes with the 2 piece 360mm rotors?
Does anyone sell just the ring, and re-use the old hat? This has to be a cheaper option than purchasing brand new 2-piece rotors, I know Racing Brake makes them for the 340mm's, but who makes them for 360mm???
Does anyone sell just the ring, and re-use the old hat? This has to be a cheaper option than purchasing brand new 2-piece rotors, I know Racing Brake makes them for the 340mm's, but who makes them for 360mm???
#56
Two piece rotors for CLK55 & CLK63
Please join discussion by clicking the thread below for the development and availability of CLK brake rotors:
https://mbworld.org/forums/5562924-post3.html
https://mbworld.org/forums/5562924-post3.html
#57
MBWorld Fanatic!
Joined: Aug 2004
Posts: 1,234
Likes: 26
From: Oakland
2018 E43 | 2017 GLS450 | 2004 CLK 500
My question is are the rear brakes from a CLK55 and CLK63 the same? Or did the CLk63 get a rear rotor upsize? Pic of my rear brake (which I saw identified as a 55 rear in another thread), My rear rotors are 26mm wide and corss drilled/slotted
#59
Super Member
Joined: Jan 2011
Posts: 512
Likes: 11
From: Houston, TX
W209 CLK Renntech Widebody, C140 CL600 V12, AP2 S2000, NSX Twin Turbo, R8 V10
Not sure lowpost- but the racingbrake website confirms that the C63 has the same rear as the non BS CLK63.
Even other vendors say they have the CLK63 non BS rotors "in stock" because they are used on other benzes. RB actually researched it and confirmed the C63 was the same rotor and offset. You can go to their website and see what's compatible with what--
Even other vendors say they have the CLK63 non BS rotors "in stock" because they are used on other benzes. RB actually researched it and confirmed the C63 was the same rotor and offset. You can go to their website and see what's compatible with what--
#60
MBWorld Fanatic!
Joined: Aug 2004
Posts: 1,234
Likes: 26
From: Oakland
2018 E43 | 2017 GLS450 | 2004 CLK 500
Thanks. I've come to the conclusion I have the slk55/clk63 f/r setup, which is the 030 package available on the 05-06 clk55?
Lol I should know I bought them brand new but cant remember and can't find my receipt.
Lol I should know I bought them brand new but cant remember and can't find my receipt.
#61
Super Member
Joined: Jan 2011
Posts: 512
Likes: 11
From: Houston, TX
W209 CLK Renntech Widebody, C140 CL600 V12, AP2 S2000, NSX Twin Turbo, R8 V10
I think that package is the clk63 AMG standard brakes... I forget now though that I finally found my replacement rotors and can move on!!
#62
Check it out from our complete two piece rotors list for your MB below:
http://www.racingbrake.com/MERCEDES-s/5788.htm
When you find your model/year, just click the item to the right and it will get you to the detail descriptions with rotor dimensions.
http://www.racingbrake.com/MERCEDES-s/5788.htm
When you find your model/year, just click the item to the right and it will get you to the detail descriptions with rotor dimensions.
#63
Super Member
Joined: Jan 2011
Posts: 512
Likes: 11
From: Houston, TX
W209 CLK Renntech Widebody, C140 CL600 V12, AP2 S2000, NSX Twin Turbo, R8 V10
Check it out from our complete two piece rotors list for your MB below:
http://www.racingbrake.com/MERCEDES-s/5788.htm
When you find your model/year, just click the item to the right and it will get you to the detail descriptions with rotor dimensions.
http://www.racingbrake.com/MERCEDES-s/5788.htm
When you find your model/year, just click the item to the right and it will get you to the detail descriptions with rotor dimensions.
#64
Although we believe we have most of the late models/years covered (By dimensions), but we may still miss some due to offset and/or retaining holes variation
Since MB has so many models/years which is almost impossible for us to list them all (application wise) so we encourage you check the dimensions of your rotors to make sure they are the right size for your MB and let us know any application we might be missing.
We will add dimension drawing for those items already made available, and also a typical drawing so anyone can't not find from the list can down load the picture, make measurement and send it back to us for identification.
These are typical Front Disc sizes (Diameter x Thickness in mm):
390x36
360x36
360x32
350x30
340x32
340x30
These discs can be assembled with different hats for different offset (rotor height) for different calipers.360x36
360x32
350x30
340x32
340x30
Rear Disc:
360x26
330x26
345x26
320x24
These discs can be assembled with different hats for different offset (rotor height) for different calipers.330x26
345x26
320x24
In addition to rotor height (offset) like front, rear rotors can also vary by the emergency Drum Sizes (Inside diameter x Shoe width) which has the following different sizes:
165x25
180x25
185x35
210x30
180x25
185x35
210x30
#65
Although we believe we have most of the late models/years covered (By dimensions), but we may still miss some due to offset and/or retaining holes variation
Since MB has so many models/years which is almost impossible for us to list them all (application wise) so we encourage you check the dimensions of your rotors to make sure they are the right size for your MB and let us know any application we might be missing.
Since MB has so many models/years which is almost impossible for us to list them all (application wise) so we encourage you check the dimensions of your rotors to make sure they are the right size for your MB and let us know any application we might be missing.
Now, if you could create a rotor package for the W210 E55 AMG, that would be awesome! The W210 E55 rotors are the same as the W202 C43. And, the late R129 (1999-2002 SL500 & SL600) uses the same sizes, but with a different hat offset on the fronts. So if you did develop rotors in these sizes (334x32 and 300x22), they would fit multiple different different chassis/applications. Hint, hint!
#66
FYI, your link above lists the E55 AMG W210 along with W211, this is incorrect... the W210 chassis was from 1996-2002 only, and has completely different brakes compared to the W211. The W210 E55 AMG (through 2002) uses factory 2-piece 334x32 front brakes, and 1-piece 300x22 rear brakes, and I don't believe you currently offer either of those sizes. (???) Your application chart should show W211 only (i.e., remove mention of the W210).
Now, if you could create a rotor package for the W210 E55 AMG, that would be awesome! The W210 E55 rotors are the same as the W202 C43. And, the late R129 (1999-2002 SL500 & SL600) uses the same sizes, but with a different hat offset on the fronts. So if you did develop rotors in these sizes (334x32 and 300x22), they would fit multiple different different chassis/applications. Hint, hint!
Now, if you could create a rotor package for the W210 E55 AMG, that would be awesome! The W210 E55 rotors are the same as the W202 C43. And, the late R129 (1999-2002 SL500 & SL600) uses the same sizes, but with a different hat offset on the fronts. So if you did develop rotors in these sizes (334x32 and 300x22), they would fit multiple different different chassis/applications. Hint, hint!
http://www.racingbrake.com/MERCEDES-s/5788.htm
Please note the status:
If no leadtime - In stock ready to ship.
With leadtime - Items are being tooled (order can still be placed)
No live link - Under development.
With leadtime - Items are being tooled (order can still be placed)
No live link - Under development.
#67
Thank you for the correction. The list is duly updated and your front and rear rotors are now available.
http://www.racingbrake.com/MERCEDES-s/5788.htm
Please note the status:
http://www.racingbrake.com/MERCEDES-s/5788.htm
Please note the status:
No live link - Under development.