When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
05 CLK55 AMG (1 of 247) Cubanitsilber designo series
Originally Posted by sales@eurocharged.com
]Eurocharged Performance is proud to announce a sale on CLK55 headers!
Sale price: $600+shipping
Our high flow exhaust headers greatly reduce exhaust gas back pressure allowing the engine to breathe freely and produce more power, and supercharged as well as naturally aspirated engines will benefit from the use of these headers.
A naturally aspirated V8 will typically gain 7 to 10 percent in horse- power and torque, while a supercharged engine will gain as much as 15 percent in horsepower and torque.
The kit includes tig welded stainless steel headers, OEM gaskets and OEM bolts.
Headers can be ceramic coated or thermal wrapped for an additional charge. Please contact Eurocharged Performance for pricing and lead time.
someone give them a call and set up a group buy. I feel like there is a lot of interest in this set especially if it fits both w208 and w209 models. I would do it, but the time difference in Korea makes it really hard
I called them for conformation on the W208 and the original build will fit.
The replacements we are reading about here are made from the same Jig and are not in stock yet but coming to USA via shipment.
Remember these are shorties and not long tubes but a promising alternative to what is out there. I am not going to blow 3k on headers for a car this old and expect large HP numbers with the age of the engine. I ordered a set
This mod just might get buy without tuning but I am speculating.
I like the thought of a group buy with tune it would guarantee results for Eurocharged and Us.
Gator
If you live in Fl I did find an ex Renntech builder that is happy to fab a set. Again I don't want to throw away good money on an aging Daily driver, but I will visit his shop for greetings though.
Last edited by GatorMB; Aug 26, 2015 at 12:51 PM.
Reason: added content
I could be interested but I would need to see some photos of the inside welds, collectors, flanges etc and get the outlet inner diameter. I presume right hand drive is not an issue? I don't know how close these are to the steering components.
I could be interested but I would need to see some photos of the inside welds, collectors, flanges etc and get the outlet inner diameter. I presume right hand drive is not an issue? I don't know how close these are to the steering components.
Agreed...and dyno sheets and sound clips. I'm not changing headers just to say I changed headers
The welds are good and the collectors look near 70mm around 2.75 "
I can post a picture tomorrow. The group buy sounds good to save some $. I was under a timing constraint and ordered mine outright.
I have been through quite a few headers on several vehicles even fabbing a set for one of my trucks (gone) These look look the right stuff. I am happy with the purchase but saving some $ would have made it better.
The collectors are angled different so it is doubtful right hand drive Vehicles are compatible.
The welds are good and the collectors are near 70mm around 2.75 "
I can post a picture tomorrow. The group buy sounds good to save some $. I was under a timing constraint and ordered mine outright.
I have been through quite a few headers on several vehicles even fabbing a set for one of my trucks (gone) These look look the right stuff. I am happy with the purchase but saving some $ would have made it better.
The collectors are angled different so it is doubtful right hand drive Vehicles are compatible.
Cheers, Gator
Thank you for the information. Are you planning to dyno the car following the install?
The welds are good and the collectors are near 70mm around 2.75 "
I can post a picture tomorrow. The group buy sounds good to save some $. I was under a timing constraint and ordered mine outright.
I have been through quite a few headers on several vehicles even fabbing a set for one of my trucks (gone) These look look the right stuff. I am happy with the purchase but saving some $ would have made it better.
The collectors are angled different so it is doubtful right hand drive Vehicles are compatible.
Cheers, Gator
Sounds like they are of good quality. Do you think that you will be able to make better down pipes that delete the primary cats, or are you stuck with the stock down pipes that wrap around the back of the motor?
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
