CLK55 AMG Kompressor
#30
Super Member
Thread Starter
https://mbworld.org/forums/clk55-amg...t-there-2.html
http://www.visracing.com/newcatalog/...-Diffuser.html
#31
Super Member
Thread Starter
#34
Super Member
Thread Starter
Sure it's worth for the swap ( even if you keep it stock ) so what about having stage 3 or more on this car, its so funny and same time risk because you reach somewhere where the car cant be controlled due to over power on this light car and less weight than e55 cls 55 etc.... i think in USA this will cost you 10k+
#35
Super Member
Thread Starter
#36
Newbie
Join Date: Dec 2016
Location: WINECountry NAPA Valley
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2004 clk55 amg 2005 clk55 amg 2003 sl55 amg 2007 R500 1984 190d
New User CLK55 enthusiast
Hello ChiCho55AMG,
Dream Car,
Thanks for new pix
I have 2 Black CLK55 AMGs - 2004 for 55K swap and 2005 Stock for Garage.
My take is to But whole E55 good runner and use Engine, ECU Etc install.
Having trouble finding someone to do it in Calif or US.
Dream Car,
Thanks for new pix
I have 2 Black CLK55 AMGs - 2004 for 55K swap and 2005 Stock for Garage.
My take is to But whole E55 good runner and use Engine, ECU Etc install.
Having trouble finding someone to do it in Calif or US.
#37
Super Member
Thread Starter
There is many w203 w209 on this forum with m113k , try to open a new thread and start locating someone near you with this swap so you can do it , its worth it believe me !
#39
Super Member
Thread Starter
#40
Junior Member
Hello ChiCho55AMG,
What pulley upgrade did you go with? What kind of power does it make? How does does the car handle the additional power?Thank you,
Whtnkls911
#42
MBWorld Fanatic!
Join Date: Oct 2012
Location: Florida
Posts: 1,425
Received 98 Likes
on
88 Posts
2002 CLK 55 AMG cabriolet Eurocharged
Star
This kind of swap has happened on many Benz.
Chico did a real pro install kudos to Chico.
To perform this swap successfully one must use MB Star software for version coding. It configures the ECU for changes.
The doner ECU vin must be modified to New chassis vin. ME 2.8 can be done with ktag maybe more.
Cheers to Chico
Chico did a real pro install kudos to Chico.
To perform this swap successfully one must use MB Star software for version coding. It configures the ECU for changes.
The doner ECU vin must be modified to New chassis vin. ME 2.8 can be done with ktag maybe more.
Cheers to Chico