Looking for the factory ride‑height and alignment specs for the CLK DTM.

Any of the 3 would be good:

• Vehicle level angle taken with the inclinometer (eg. for CLK63 BS --> F: 8.3° ±0.5° | R: -4.3° ±0.5°)
• Thread height (“h”) on the coil‑over spring perch (eg. for CLK63 BS --> F: 27mm ±1mm | R: 39.5mm ±1mm)
• Hub‑centre to fender‑lip distance

If the information for CLK DTM is not available at all, does anyone know if I can reference the CLK63 BS specs as a reliable baseline?

Also, if anyone can share or sell the owner’s or workshop manual (PDF or hard copy), please PM me.

Thanks!