Kleeman dyno on 2012
#1
Thread Starter
Newbie
Joined: Jan 2014
Posts: 7
Likes: 0
From: Knoxville, TN
2012 CLS550, 2005 Grand Cherokee, 2006 Wrangler
#3
Thread Starter
Newbie
Joined: Jan 2014
Posts: 7
Likes: 0
From: Knoxville, TN
2012 CLS550, 2005 Grand Cherokee, 2006 Wrangler
It is calculated at the wheels and is not adjusted. 433hp and about 525tq. Only mods are the resonator is removed and Kleeman tuned the computer. So with a 15% loss added back, it would be 509HP and 617tq.
#4
What are your concerns on the AFR?. did they use a wide band during the pulls? As far is your dyno output numbers, I think that you are spot on with other tuners like Dyno-comp which got 443whp/520lb-tq on a Dyno Dynamic dyno: see link below
http://www.dynocomp.com/details.php?...90#detail_1191
http://www.dynocomp.com/details.php?...90#detail_1191
Last edited by C63newdude; 08-21-2014 at 11:31 PM.
#6
Thread Starter
Newbie
Joined: Jan 2014
Posts: 7
Likes: 0
From: Knoxville, TN
2012 CLS550, 2005 Grand Cherokee, 2006 Wrangler
I did not do a baseline. AFR was measured with a wide band in the exhaust. I am happy with the results, as they are slightly better than Kleeman advertised. I thought the AFR's should not be over 12-12.5 at full throttle.
#7