Would these fit a W219 - 20x11 et35
06-18-2013, 05:05 AM
#2
They will go on...I run 10.5s on the rear of mine with an offset of et17 and as I run mine low, cant get a wider tyre on it than a 255/35 
Im assuming you run near stock height in which case you should be ok
Im assuming you run near stock height in which case you should be ok
06-18-2013, 09:18 AM
#3
Super Member
Thread Starter
Wow..et17 is low, even with 10.5.
What has me confused is how these were on a 2012 CLS. It's a 20x9 et35 and his OEM et is 47 if I recall. Our OEM et is 28.
So he is pushing his out 12mm and I would have been going in 7mm. Confusing.
Lakehouse is checking his et's on 20" rims that he installed to get a comparison because he isn't running spacers.
What has me confused is how these were on a 2012 CLS. It's a 20x9 et35 and his OEM et is 47 if I recall. Our OEM et is 28.
So he is pushing his out 12mm and I would have been going in 7mm. Confusing.
Lakehouse is checking his et's on 20" rims that he installed to get a comparison because he isn't running spacers.
06-20-2013, 10:42 PM
#5
Senior Member
Join Date: Oct 2011
Location: New Jersey
Posts: 285
Likes: 0
Received 1 Like
on
1 Post
CLS, Grand Cherokee, Range Rover HSE, 70 cuda 440+6
Et35 / 11" wide will not fit . It WILL rub the inside plastic . Try it.. You will need a 10mm spacer or 15mm spacer . No big deal.
