My new Renntech CLS55 & Interior
#1
Junior Member
Thread Starter
My new Renntech CLS55 & Interior
Just got my new for me CLS55, all Renntech'd out! The thing insanely fast and I just love everything about this car except the interior wood grain! I wrap exotic cars for a living so I did the dash in the new 3M Di-Noc Ebony Matalic. It looks unbelievable in person, kinda like the 14 Audi S8 dash, has a slight sheen with grain in it, really cool. Has anyone out there removed the rear console, I was searching, cant really find it! Just wanted to get some tips before I start yanking on stuff! Got the seat bottoms out already. Thanks!
#4
Junior Member
Thread Starter
tasho3,
I Bought a Range Rover from you guys a few years back! That's crazy
I Bought a Range Rover from you guys a few years back! That's crazy
#5
MBWorld Fanatic!
BTW. I absolutely love your car. Saw the pics originally on my phone but now that I viewed them on my laptop the car looks very clean and tastefully modded.
Last edited by tasho3; 12-09-2013 at 07:14 PM.
#6
Junior Member
Thread Starter
Thanks Tasho. I just got it, I didn't really do much myself yet except for the interior. All the Renntech stuff was done at Vivid racing. I'm not one to leave things alone! I was thinking about doing the carbon fiber front splitter, rear defuser and possible the mirrors. I just didnt want to do the cf interior.
http://www.vividracing.com/blog/proj...ocks-the-dyno/
This was a while back but I found it on my car.
http://www.6speedonline.com/forums/a...-h-r-sale.html
http://www.vividracing.com/blog/proj...ocks-the-dyno/
This was a while back but I found it on my car.
http://www.6speedonline.com/forums/a...-h-r-sale.html
Last edited by djcriss; 12-11-2013 at 12:43 AM.
Trending Topics
#8
Member
Hello,
To remove The rear middle console, you have to unscrew to bolts into te front middle glove box. They are just above the rear grills.
Then you have a 10mm bolt into the second compartment (pull up the piece of carpet to see the bolt).
Then remove both rear seats (left and right).
If i'm not wrong, you should find another bolt on the back of the box.
After doing this, pull strongly placing your hand just under the grills.
The box will be losed, then put your hands on each sides and pull up the box.
To remove the jalousy, you'll have to unscrew 2 screws under the box, and remove a piece of plastic that stopping the jalousy. After removing this piece, then you'll be able to roll out the jalousy.
Regards,
Frenchy.
To remove The rear middle console, you have to unscrew to bolts into te front middle glove box. They are just above the rear grills.
Then you have a 10mm bolt into the second compartment (pull up the piece of carpet to see the bolt).
Then remove both rear seats (left and right).
If i'm not wrong, you should find another bolt on the back of the box.
After doing this, pull strongly placing your hand just under the grills.
The box will be losed, then put your hands on each sides and pull up the box.
To remove the jalousy, you'll have to unscrew 2 screws under the box, and remove a piece of plastic that stopping the jalousy. After removing this piece, then you'll be able to roll out the jalousy.
Regards,
Frenchy.
Last edited by TheFrenchy; 12-11-2013 at 05:43 PM.
#9
Junior Member
Thread Starter
#10
MBWorld Fanatic!
Thanks Tasho. I just got it, I didn't really do much myself yet except for the interior. All the Renntech stuff was done at Vivid racing. I'm not one to leave things alone! I was thinking about doing the carbon fiber front splitter, rear defuser and possible the mirrors. I just didnt want to do the cf interior.
http://www.vividracing.com/blog/proj...ocks-the-dyno/
This was a while back but I found it on my car.
http://www.6speedonline.com/forums/a...-h-r-sale.html
http://www.vividracing.com/blog/proj...ocks-the-dyno/
This was a while back but I found it on my car.
http://www.6speedonline.com/forums/a...-h-r-sale.html