Bad intake manifold



It went off then came back.
Car went in had service A and the SA calls me and says they are replacing the Intake Manifold?? How does a manifold go bad? Weird eh?
Ok any input here appreciated



Hey man , no biggie, was a gasket. "intake manifold gaskets" replaced under warranty.
Car runs amazing lol.
Hope you had a great X mas.
Guys the folks at DTLA MB service are amazing.
I have been there 2x Service A was 217.00 included OIL and free rental C230 sport with AMG tips!!
The first service was 92.00. Barry or Tino are the guys to see if anybody is fearful of R A P E.
Sam I know you have connections so this is only for the Los Angeles folks who are not happy with service depts at other places.
They also were supportive of the ECU tune and I had em rolling over the r comp slicks on the rear!! Guy says "uh you need new rear tires" I say " uh no they are superior to fully treaded Pirellis..LOL
Oh what a fun day.
I've also took it to a race track (twisties) and been racing it on the streets like crazy.I didn't get the check engine light thing yet, but I know I will
Please post the ticket write-up information just in case this issue gets around
Trending Topics
The Best of Mercedes & AMG






Car runs amazing lol.
Hope you had a great X mas.
Guys the folks at DTLA MB service are amazing.
I have been there 2x Service A was 217.00 included OIL and free rental C230 sport with AMG tips!!
The first service was 92.00. Barry or Tino are the guys to see if anybody is fearful of R A P E.
Sam I know you have connections so this is only for the Los Angeles folks who are not happy with service depts at other places.
They also were supportive of the ECU tune and I had em rolling over the r comp slicks on the rear!! Guy says "uh you need new rear tires" I say " uh no they are superior to fully treaded Pirellis..LOL
Oh what a fun day.
It is code P2187 (system too lean at idle, Bank#1) I cleared the code. I will see if it comes back on. I also had another light on about 2 weeks ago P0410? Aux air valve system x2. Cleared that code also and now this?
Time for some pros to chime in. What,s going on here? Car runs fast but slight misfire at Idle. I have a new camera set up in the ride
Will post info when I get Home.........
=========> If you have black engine oil gauge, it needs to be changed to the red one. I had same problem but after changing it never happen again.
Last edited by yunica99; Dec 28, 2007 at 08:02 AM.
It appears, that the bolts were not torqued properly during inital built, so gaskets leak after a number of miles.
Rick, have your local dealer do a TSB.
It is code P2187 (system too lean at idle, Bank#1) I cleared the code. I will see if it comes back on. I also had another light on about 2 weeks ago P0410? Aux air valve system x2. Cleared that code also and now this?
Time for some pros to chime in. What,s going on here? Car runs fast but slight misfire at Idle. I have a new camera set up in the ride
Will post info when I get Home.........(1) harness
, (2) misc other gaskets
, (1) tube special sealer
.Also the S/A stated that the gaskets for the intake are a new type
. I may just tighten down the bolts to spec and see if the light comes back on. Hey what about the post that talks about the oil dip stick?



