Initial Break-in?
Aren't all these engines put through the paces at the factory on an engine dyno before ever being put into a car? Or is more a drivetrain thing with the transmission and diff and all that?
After the parts are appropriately “ worn” , and the oil has been changed, you can go hog wild.
Premature over use may may prevent piston rings from setting up properly and may lead to premature engine wear.
After the parts are appropriately “ worn” , and the oil has been changed, you can go hog wild.
Premature over use may may prevent piston rings from setting up properly and may lead to premature engine wear.
Aren't all these engines put through the paces at the factory on an engine dyno before ever being put into a car? Or is more a drivetrain thing with the transmission and diff and all that?
After the parts are appropriately “ worn” , and the oil has been changed, you can go hog wild.
Premature over use may may prevent piston rings from setting up properly and may lead to premature engine wear.
Trending Topics
Yes, I always warm up properly. First 1000-2000 miles I drive in comfort and vary rpms and never floor it to avoid kick down.
The Best of Mercedes & AMG
I always drive in Comfort mode until the engine oil reaches appropriate temperature usually after several minutes and than switch to my Individual setting which has Race transmission.
My round trip work commute is 12 miles so it takes me too long to reach 2000 miles so I've used 500 miles as a threshold. So far I'm at 450 miles owning the car since September 1st. The engine does seem to perform better at 450 miles compared to delivery with 25 miles on the odometer.
I always drive in Comfort mode until the engine oil reaches appropriate temperature usually after several minutes and than switch to my Individual setting which has Race transmission.
My round trip work commute is 12 miles so it takes me too long to reach 2000 miles so I've used 500 miles as a threshold. So far I'm at 450 miles owning the car since September 1st. The engine does seem to perform better at 450 miles compared to delivery with 25 miles on the odometer.
You certainly won't blow up the engine with some full throttle right out of the box, god knows it happens all the time with salesmen/porters driving the newest and fanciest cars on the lot, hard to resist the temptation to give it some throttle. But if it was driven like a race car from day one, it will never learn how to be smooth and relaxed when you want it to be. Teach it to be normal, then use Sport+ or Race to make it run like a race car. That's the engineering intention.
You certainly won't blow up the engine with some full throttle right out of the box, god knows it happens all the time with salesmen/porters driving the newest and fanciest cars on the lot, hard to resist the temptation to give it some throttle. But if it was driven like a race car from day one, it will never learn how to be smooth and relaxed when you want it to be. Teach it to be normal, then use Sport+ or Race to make it run like a race car. That's the engineering intention.
At least it's not 2000 mile recommended break in like Porsche.
Last edited by bford100; Oct 19, 2017 at 11:44 PM.
The things it's learning are mainly transmission gear change adaptations, times and pressures to get desired shift quality. The "desired" window for a comfort shift is longer than one in a more aggressive mode, but driving harder won't give you harsher shifting all the time, it will just take longer to learn it's points.
When we do an adaptation drive after a repair or reset, it requires 5 repeated gear changes, for each shift, at a specified low torque and engine speed. It's trying to learn how to shift in normal driving, not *****-out. From there, when you put your foot in it, it knows to go faster and harder. If it never learns what it takes for a nice smooth shift, it just goes off the factory default, instead of adjusting to the specific characteristics of your actual powertrain.
The things it's learning are mainly transmission gear change adaptations, times and pressures to get desired shift quality. The "desired" window for a comfort shift is longer than one in a more aggressive mode, but driving harder won't give you harsher shifting all the time, it will just take longer to learn it's points.
When we do an adaptation drive after a repair or reset, it requires 5 repeated gear changes, for each shift, at a specified low torque and engine speed. It's trying to learn how to shift in normal driving, not *****-out. From there, when you put your foot in it, it knows to go faster and harder. If it never learns what it takes for a nice smooth shift, it just goes off the factory default, instead of adjusting to the specific characteristics of your actual powertrain.
I ask because I’ve been led to believe, as well as read, that ECU’s/TCU’s are constantly adaptive in modern high performance vehicles. Meaning that the drivetrain characteristics will ‘change’ relatively rapidly; (within 10-20 miles?), depending on how the driver is actually driving in real time. Hence, you could be in ‘Comfort’ mode because the road is crappy, but actually driving the car briskly; hence the engine and transmission will respond more quickly than if you’re just tooling around. Conversely you could be in Sport/Sport + type modes but driving ‘sedately’; hence the gear changes, etc. are less brisk than if you were driving in ‘earnest’.
There are no doubt baseline maps, but the adaptive maps will ‘over-write’ those given the way in which the car is actually driven by the owner.
Bish
I ask because I’ve been led to believe, as well as read, that ECU’s/TCU’s are constantly adaptive in modern high performance vehicles. Meaning that the drivetrain characteristics will ‘change’ relatively rapidly; (within 10-20 miles?), depending on how the driver is actually driving in real time. Hence, you could be in ‘Comfort’ mode because the road is crappy, but actually driving the car briskly; hence the engine and transmission will respond more quickly than if you’re just tooling around. Conversely you could be in Sport/Sport + type modes but driving ‘sedately’; hence the gear changes, etc. are less brisk than if you were driving in ‘earnest’.
There are no doubt baseline maps, but the adaptive maps will ‘over-write’ those given the way in which the car is actually driven by the owner.
Bish
My experience has been as you describe. In my GTS it changes depending on the kind of driving I do. For instance if I am in the hills on windy roads in Sport+ and I'm working the car, it quickly adapts and holds shifts much longer - becomes a beast. When I get back to town, let's say the next day I am in Comfort but then select Sport+ but I'm not flogging it, it will upshift much sooner - it'll still hold a gear longer than in Comfort, but not like it did when being flogged in the hills. Seems quickly rapidly adaptive to me.
I ask because I’ve been led to believe, as well as read, that ECU’s/TCU’s are constantly adaptive in modern high performance vehicles. Meaning that the drivetrain characteristics will ‘change’ relatively rapidly; (within 10-20 miles?), depending on how the driver is actually driving in real time. Hence, you could be in ‘Comfort’ mode because the road is crappy, but actually driving the car briskly; hence the engine and transmission will respond more quickly than if you’re just tooling around. Conversely you could be in Sport/Sport + type modes but driving ‘sedately’; hence the gear changes, etc. are less brisk than if you were driving in ‘earnest’.
There are no doubt baseline maps, but the adaptive maps will ‘over-write’ those given the way in which the car is actually driven by the owner.
Bish
My experience has been as you describe. In my GTS it changes depending on the kind of driving I do. For instance if I am in the hills on windy roads in Sport+ and I'm working the car, it quickly adapts and holds shifts much longer - becomes a beast. When I get back to town, let's say the next day I am in Comfort but then select Sport+ but I'm not flogging it, it will upshift much sooner - it'll still hold a gear longer than in Comfort, but not like it did when being flogged in the hills. Seems quickly rapidly adaptive to me.
What I'm talking about is the software learning the hardware. The exact shift times and such will vary from one transmission to the next, the software compensates to make, in theory, every car drive the same, once the adaptations are set. This is different than the car reacting to how you're driving and holding gears longer, that's not adaptation, but a response to your aggressive inputs. This behavior happens quickly but also goes away quickly. If you stop for coffee and then drive normally home, the car won't be holding shifts and preparing for aggressive driving.
We were discussing break-in, which absolutely is designed to give the car time to learn everything, mate that engine and transmission together with any production variations and make it all play nice. I'm an MB tech, this is what I do.
What I'm talking about is the software learning the hardware. The exact shift times and such will vary from one transmission to the next, the software compensates to make, in theory, every car drive the same, once the adaptations are set. This is different than the car reacting to how you're driving and holding gears longer, that's not adaptation, but a response to your aggressive inputs. This behavior happens quickly but also goes away quickly. If you stop for coffee and then drive normally home, the car won't be holding shifts and preparing for aggressive driving.
We were discussing break-in, which absolutely is designed to give the car time to learn everything, mate that engine and transmission together with any production variations and make it all play nice. I'm an MB tech, this is what I do.
A/F targets are always stoich out of power enrichment, and a set power enrich setting at enough throttle. Changes screw with emissions so adaptations don't adjust that.
The timing, most Japanese manufacturers have 3 maps, a middle "stock" map, and aggressive, and a retarded map. You can manually set + or - 2 degrees of timing using the factory scan tools on nissan stuff. If you drive like a putz all the time, it will end up on the softest map by default. If you are always playing Ricky Bobby, it will end up on the advanced map.
What I'm talking about is the software learning the hardware. The exact shift times and such will vary from one transmission to the next, the software compensates to make, in theory, every car drive the same, once the adaptations are set. This is different than the car reacting to how you're driving and holding gears longer, that's not adaptation, but a response to your aggressive inputs. This behavior happens quickly but also goes away quickly. If you stop for coffee and then drive normally home, the car won't be holding shifts and preparing for aggressive driving.
We were discussing break-in, which absolutely is designed to give the car time to learn everything, mate that engine and transmission together with any production variations and make it all play nice. I'm an MB tech, this is what I do.
On tuned cars, I've seen plenty of instances of codes setting related to parameters changed by the tune, unfortunately the first step to making sure the parts are working properly is to put a factory calibration back in it and see if it returns. On my tuned CL, there's very little in the way of airflow diag. On these new 177/178 engines, they check everything, and there's stuff the tuners can't see or don't know needs to be addressed. The increased airflow from the tune can cause strange issues.
On tuned cars, I've seen plenty of instances of codes setting related to parameters changed by the tune, unfortunately the first step to making sure the parts are working properly is to put a factory calibration back in it and see if it returns. On my tuned CL, there's very little in the way of airflow diag. On these new 177/178 engines, they check everything, and there's stuff the tuners can't see or don't know needs to be addressed. The increased airflow from the tune can cause strange issues.
My understanding is that guys who get second ECUs on tuned cars, don’t understand that this information is stored in those buses and therefore the second ECU is useless.









