~New Zaino Z-AIO and Z-CS Products~
Thread Starter
Member
Joined: Jan 2006
Posts: 141
Likes: 0
From: Nashville, TN
'03 C230 Sedan
~New Zaino Z-AIO and Z-CS Products~
Has anyone had any experience with either of these products? I'm thinking about ordering them because of the great reviews on varying forums, but of course I must always consult my MBWorld folks first. Any feedback would be great, thanks!
Super Member
Joined: Nov 2003
Posts: 880
Likes: 4
From: Ponte Vedra Beach FL/ Hampstead, London, England
'84 380 SL/ '02 XK8
Zaino™ Clear Seal Clear Seal Application:
Even if you use Zaino extensively take this as a reminder - Like all Zaino products there is a small 'learning curve' and this product is no exception; I cannot emphasise enough. ‘Apply products very sparingly’
Z-CS is a self curing optically clear sealer and is in my opinion; one of the most innovative products and a watershed moment in automotive detailing products thus far
•Use the new Zaino cotton applicator that comes with your Z-CS order.
•Mist the applicator once or twice lightly
•Lightly mist the centre of the panel
•Work into the panel with 5-6 passes per section using back and forth motions (in direction of air flow)
•Use very light pressure, gliding the applicator over the panel
•Z-CS Clear Seal dries clean and ‘optically clear’ in approx.15 - 30 minutes (65° F - 21°C) and typically 2 – 6 hours to cross-link depending on atmospheric conditions.
•Optional- Once Z-CS is thoroughly dry, 30-45 minutes buff Z-CS with a micro fibre cloth
•LSP ( and ‘maintenance ‘) use Z-8 Grand Finale Spray Seal
Even if you use Zaino extensively take this as a reminder - Like all Zaino products there is a small 'learning curve' and this product is no exception; I cannot emphasise enough. ‘Apply products very sparingly’
Z-CS is a self curing optically clear sealer and is in my opinion; one of the most innovative products and a watershed moment in automotive detailing products thus far
•Use the new Zaino cotton applicator that comes with your Z-CS order.
•Mist the applicator once or twice lightly
•Lightly mist the centre of the panel
•Work into the panel with 5-6 passes per section using back and forth motions (in direction of air flow)
•Use very light pressure, gliding the applicator over the panel
•Z-CS Clear Seal dries clean and ‘optically clear’ in approx.15 - 30 minutes (65° F - 21°C) and typically 2 – 6 hours to cross-link depending on atmospheric conditions.
•Optional- Once Z-CS is thoroughly dry, 30-45 minutes buff Z-CS with a micro fibre cloth
•LSP ( and ‘maintenance ‘) use Z-8 Grand Finale Spray Seal
Last edited by TOGWT; May 8, 2007 at 09:26 AM.
