Help how to replace high pressure pump ??
11-26-2007, 11:01 AM
#2
MBWorld Fanatic!
Join Date: Dec 2006
Location: Europe
Posts: 6,378
Received 295 Likes
on
247 Posts
223.168 & 213.012 & 906.633 & 214.005
Did you find any help for this one? It should not be too complicated if you are not fixing the pump but replacing with a new one. Have to be very careful that everything is clean. But there is one connection that should not be opened when removing the high pressure lines, I'd suggest getting hold of a more detailed guide.
11-29-2007, 02:27 AM
#3
Senior Member
Join Date: Jun 2004
Location: Michigan, USA
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
'05 E320 CDI, '07 VW Touareg V10 TDI, 2007 Porsche GT3
[quote, I'd suggest getting hold of a more detailed guide.[/quote]
Yep, good advice. I believe it's necessary to prime the new pump, although I'm clueless as to how that's done!
Good luck! Please post back and let us know how it went.-
Yep, good advice. I believe it's necessary to prime the new pump, although I'm clueless as to how that's done!
Good luck! Please post back and let us know how it went.-
