95 E300 fuel lines...
#26
Super Member
You can crush those orings pretty easily with a wrench. Not sure what teh torque spec is; I hand tighten the canister filter just like an old oil filter on a chevy, then give the bolt on top ~1/8 turn.
#27
Senior Member
Thread Starter
Join Date: Jan 2006
Location: Temecula, CA
Posts: 253
Likes: 0
Received 5 Likes
on
5 Posts
Tesla model S
[QUOTE=TMAllison;3845300]You can crush those orings pretty easily with a wrench. Not sure what teh torque spec is; I hand tighten the canister filter just like an old oil filter on a chevy, then give the bolt on top ~1/8 turn.[/QUOT
Errr, I might have turned it a little more than that - I hand tightened the fuel filter as you described then turned it down a full turn or more with the wrench I had.
Errr, I might have turned it a little more than that - I hand tightened the fuel filter as you described then turned it down a full turn or more with the wrench I had.