4.7 Bi-Turbo: Laughingly under rated...
#1
Member
Thread Starter
Join Date: Aug 2011
Location: Loony left coast
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
2012 E550 Coupe
4.7 Bi-Turbo: Laughingly under rated...
Has anyone seen actual dyno results from the new BT V8 in the E550? I asked this because every time I drop the hammer on my 550, I say to myself "this thing has got WAY more than 402 horsepower". I took delivery last November and I still can't get the smile off my face! I used to own a Corvette C6 and I'm convinced that my 550 would hand the Vette it's azz.
#3
Super Member
Join Date: Jan 2012
Location: New Zealand
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
CLK55 AMG
#4
Member
I haven't seen any dyno results, but I'm impressed with the E550. It is fast, but I don't think it's a lot more than 402HP.
I definitely notice a difference between the E550 and the C63, though I have described the E550 acceleration as "like the C63 without the drama".
When you step on it in the C63 you get noise and a nice rumbling sensation as you zoom away. In the E550 you get almost the same acceleration, but without all the noise and vibration. You have to look at the speedo to realize how fast you just accelerated.
It's a great car.
I definitely notice a difference between the E550 and the C63, though I have described the E550 acceleration as "like the C63 without the drama".
When you step on it in the C63 you get noise and a nice rumbling sensation as you zoom away. In the E550 you get almost the same acceleration, but without all the noise and vibration. You have to look at the speedo to realize how fast you just accelerated.
It's a great car.
#5
Super Member
Look at the thread about the M278 RENNtech tune on this forum.
See RENNtech's info: http://www.renntechmercedes.com/www/node/702
(scroll through pictures)
Their graph compares the stock M278 engine to their tune. Stock is considerably more than 402..... or 429.
Read the results a '12 CLS 550 (on their forum) had at the strip after the RT tune: best of 12.3/ 1/4 mile: stock (including tires) except tune. Wheelspin was an issue.
See RENNtech's info: http://www.renntechmercedes.com/www/node/702
(scroll through pictures)
Their graph compares the stock M278 engine to their tune. Stock is considerably more than 402..... or 429.
Read the results a '12 CLS 550 (on their forum) had at the strip after the RT tune: best of 12.3/ 1/4 mile: stock (including tires) except tune. Wheelspin was an issue.
Last edited by Dueclaws; 06-01-2012 at 10:36 AM.
#6
Junior Member
Join Date: May 2012
Location: Markham, Ontario Canada
Posts: 45
Likes: 0
Received 2 Likes
on
1 Post
2018 C43 AMG, Previous 2016 E550 Coupe, Previous 2012 E550 Coupe
I agree on the way more horsepower thing with the 4.7.
I came from a revvy Japanese V6 and thought I was still adjusting to all that torque from the E550 starting at 1900 rpm.
I do like the subtle whine from the turbos with all the windows down pulling away from city stop lights
I came from a revvy Japanese V6 and thought I was still adjusting to all that torque from the E550 starting at 1900 rpm.
I do like the subtle whine from the turbos with all the windows down pulling away from city stop lights
#7
Member
Join Date: Nov 2011
Location: Manassas Va
Posts: 116
Likes: 0
Received 1 Like
on
1 Post
2012 E550 Coupe
Why in the world would MB underrate the HP? This isn't the 60's where American muscle cars did this to try and lower the insurance rates their customers would pay. Is there really any marketing advantage to advertising a lower HP number? I think not.
Does anyone really believe the MB dyno doesn't work?
BTW chassis dyno's are notoriously error prone especially when trying to apply some correction factor to get the crank horsepower. In particular they have no method to accurately control the intake temperature or the airflow over a turbo engine inter-cooler system be it air to air or air to water. Usually they attempt to blow air with a big squirrel cage fan.
Be very suspicious of any HP results that don't make a correction to SAE or whatever the european standard conditions are.
Does anyone really believe the MB dyno doesn't work?
BTW chassis dyno's are notoriously error prone especially when trying to apply some correction factor to get the crank horsepower. In particular they have no method to accurately control the intake temperature or the airflow over a turbo engine inter-cooler system be it air to air or air to water. Usually they attempt to blow air with a big squirrel cage fan.
Be very suspicious of any HP results that don't make a correction to SAE or whatever the european standard conditions are.
Trending Topics
#8
Newbie
Join Date: Apr 2012
Location: Milwaukee
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
2008 Volvo S80
Why in the world would MB underrate the HP? This isn't the 60's where American muscle cars did this to try and lower the insurance rates their customers would pay. Is there really any marketing advantage to advertising a lower HP number? I think not.
Does anyone really believe the MB dyno doesn't work?
BTW chassis dyno's are notoriously error prone especially when trying to apply some correction factor to get the crank horsepower. In particular they have no method to accurately control the intake temperature or the airflow over a turbo engine inter-cooler system be it air to air or air to water. Usually they attempt to blow air with a big squirrel cage fan.
Be very suspicious of any HP results that don't make a correction to SAE or whatever the european standard conditions are.
Does anyone really believe the MB dyno doesn't work?
BTW chassis dyno's are notoriously error prone especially when trying to apply some correction factor to get the crank horsepower. In particular they have no method to accurately control the intake temperature or the airflow over a turbo engine inter-cooler system be it air to air or air to water. Usually they attempt to blow air with a big squirrel cage fan.
Be very suspicious of any HP results that don't make a correction to SAE or whatever the european standard conditions are.
#9
Not sure if this is related but the gas filler says 91 RON is required, but if you can use 93 (as I can here in VA) the computer will (?) adjust the advance and other parameters to better utilize this better fuel and may yield greater HP and torque. A guess on my part.
#10
Member
Join Date: Nov 2011
Location: Manassas Va
Posts: 116
Likes: 0
Received 1 Like
on
1 Post
2012 E550 Coupe
I think this is one of those car myth's passed on through the ages started when in fact it was done for insurance reasons as in my previous post. Those days are long gone.
In what universe would understating the horsepower result in more sales which is after all the main objective of any business.
#11
Member
Join Date: Nov 2011
Location: Manassas Va
Posts: 116
Likes: 0
Received 1 Like
on
1 Post
2012 E550 Coupe
Not sure if this is related but the gas filler says 91 RON is required, but if you can use 93 (as I can here in VA) the computer will (?) adjust the advance and other parameters to better utilize this better fuel and may yield greater HP and torque. A guess on my part.
BTW increasing the ignition lead does not always increase engine performance. At some point it results in a horsepower loss since the initiation of combustion tries to drive the piston back down into the bore.
#12
Common knowledge based on what facts?
I think this is one of those car myth's passed on through the ages started when in fact it was done for insurance reasons as in my previous post. Those days are long gone.
In what universe would understating the horsepower result in more sales which is after all the main objective of any business.
I think this is one of those car myth's passed on through the ages started when in fact it was done for insurance reasons as in my previous post. Those days are long gone.
In what universe would understating the horsepower result in more sales which is after all the main objective of any business.
A lot of companies do it to avoid eating into another cars sales. i.e many have claimed the 1M to be VASTLY underrated because they didn't want it to encroach on the E92 M3's power.
The following users liked this post:
marvinlee (09-25-2023)
#13
It may be some advantage depending on the piston/head/cam design. Even if it does increase the hp the gain is minimal. As an example a decrease of lead by 1 degree on my 1000 hp drag race motors from peak power resulted in a 3 hp or so loss when measured at the flywheel on a engine dyno. Generally we ran the motor at this point to decrease the possibility of detonation during the hot lapping that would occur in the later rounds.
BTW increasing the ignition lead does not always increase engine performance. At some point it results in a horsepower loss since the initiation of combustion tries to drive the piston back down into the bore.
BTW increasing the ignition lead does not always increase engine performance. At some point it results in a horsepower loss since the initiation of combustion tries to drive the piston back down into the bore.
#14
Member
Join Date: Nov 2011
Location: Manassas Va
Posts: 116
Likes: 0
Received 1 Like
on
1 Post
2012 E550 Coupe
I agree with your points - but some performance advantage does come with the 93 RON vs the 91 RON. When companies like Renntech "adjust" the ECU (i.e. tune the car) they manage to extract about 10% more power (+ or -) without changing any hardware. So the factory does leave a little power on the table due to the "lowest common denominator" of fuel quality and the factory's wish to provide a conservative and long-lived engine/drive-train. No?
The OEM's don't understate the HP, they actually state the correct HP using prudent engineering design parameters in both the hardware and software.
I think anyone who chooses to violate these margins in a street car is foolish. That is why you in essence throw away any factory warranty when you change the tune. The auto industry is littered with denied warranty claims form people who used "tuner" upgrades".
I have no problem with people doing this. I do have a problem with people who blow something up doing this and then whine about the car being poorly designed and/or the OEM not standing behind their product.
#16
Super Member
It may be some advantage depending on the piston/head/cam design. Even if it does increase the hp the gain is minimal. As an example a decrease of lead by 1 degree on my 1000 hp drag race motors from peak power resulted in a 3 hp or so loss when measured at the flywheel on a engine dyno. Generally we ran the motor at this point to decrease the possibility of detonation during the hot lapping that would occur in the later rounds.
BTW increasing the ignition lead does not always increase engine performance. At some point it results in a horsepower loss since the initiation of combustion tries to drive the piston back down into the bore.
BTW increasing the ignition lead does not always increase engine performance. At some point it results in a horsepower loss since the initiation of combustion tries to drive the piston back down into the bore.
My boat has 2- 1,000 hp engines and we gained 25 hp going from 30* to 32*. These engines are built for endurance and power; there are so many variables involved that it's difficult to make comparisons to other engines.
Regardless, I'm very impressed with the power of our '12 E550C.
#17
Member
Join Date: Nov 2011
Location: Manassas Va
Posts: 116
Likes: 0
Received 1 Like
on
1 Post
2012 E550 Coupe
I agree with some of your statements, but there are engines and applications that respond to timing changes, although the timing changes might not effect your drag race engines.
My boat has 2- 1,000 hp engines and we gained 25 hp going from 30* to 32*. These engines are built for endurance and power; there are so many variables involved that it's difficult to make comparisons to other engines.
Regardless, I'm very impressed with the power of our '12 E550C.
My boat has 2- 1,000 hp engines and we gained 25 hp going from 30* to 32*. These engines are built for endurance and power; there are so many variables involved that it's difficult to make comparisons to other engines.
Regardless, I'm very impressed with the power of our '12 E550C.
I have no idea how the MB engines are designed but I'd be really surprised of they were not very fast flame front designs since this in general produces more efficient and cleaner use of fuel input which these engines seem to do a very good job of given their excellent fuel economy.
If anyone knows what is the lead at full throttle at higher rpms of these engines?
The following users liked this post:
marvinlee (09-25-2023)
#18
Most if not all modern design engines are designed with pistons and head chambers to promote a very fast flame front. As an example a Pro Stock drag engine uses something like 18 or less degrees lead. Older big block Chevy and Ford engines operated somewhere north of 30 degrees lead.
I have no idea how the MB engines are designed but I'd be really surprised of they were not very fast flame front designs since this in general produces more efficient and cleaner use of fuel input which these engines seem to do a very good job of given their excellent fuel economy.
If anyone knows what is the lead at full throttle at higher rpms of these engines?
I have no idea how the MB engines are designed but I'd be really surprised of they were not very fast flame front designs since this in general produces more efficient and cleaner use of fuel input which these engines seem to do a very good job of given their excellent fuel economy.
If anyone knows what is the lead at full throttle at higher rpms of these engines?
#19
Member
Join Date: Nov 2011
Location: Manassas Va
Posts: 116
Likes: 0
Received 1 Like
on
1 Post
2012 E550 Coupe
Direct injection does allow a little better volumetric efficiency by allowing the intake port/valve design to be a dry air design. This tends to flatten out the torque curve some but max power is at an rpm value above the peak torque point.
I wonder how direct injection engines will do in long term reliability since the injector nozzles are right in the combustion chamber. I guess we will find out down the road.
#20
MBWorld Fanatic!
#22
Super Member
It would be interesting to compare part numbers in these M278's. Maybe the only difference, if any, is a tune.
Anyone have access to the 2012 M278 engine part numbers?
Last edited by Dueclaws; 06-04-2012 at 10:21 PM.
#25
Senior Member
Join Date: Jun 2012
Location: Arlington, VA
Posts: 359
Likes: 0
Received 5 Likes
on
3 Posts
2012 E550 Coupe
I was having a chat with a MB foreman the other day on this subject. The speculation was that there is no difference in engine or tune between the 550 models, but that the quoted numbers were lower because buyers of an SL or S expect to have more than an E-Class.
I say speculation because he also let me watch while he updated my ECU - he has no real part in it. The computer communicates with Stuttgart and uploads the correct software. He can't really see any information regarding engine tuning.
I say speculation because he also let me watch while he updated my ECU - he has no real part in it. The computer communicates with Stuttgart and uploads the correct software. He can't really see any information regarding engine tuning.