2010 E550 Radiator Drain Plug clogged?
#1
Newbie
Thread Starter
Join Date: Jun 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
2010 E550, 2012 S550
2010 E550 Radiator Drain Plug clogged?
I want to drain some coolant so I can replace the thermostat. Jacked and stands under the front jack points. Removed the covers underneath and opened up up the collant tank cap. Drain plug is not like the manual, its on the side, recessed, and has a yellow stripe across it. I turned it 90 degrees ccw, and nothing. stuck a pin punch up the drain hole, I can feel it hit the plug but again, nothing. The drain hole has no old dirt or gunk in it.
Am I missing something here? whenI turn the plug 90 degrees ccw, it feels like it hits a stop. I don't want to force it. What to try next?
Thanks in advance
Am I missing something here? whenI turn the plug 90 degrees ccw, it feels like it hits a stop. I don't want to force it. What to try next?
Thanks in advance
#2
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,417 Likes
on
3,146 Posts
'71 Pinto
Workshop manual: http://workshop-manuals.com/mercedes...res/page_2283/ + next pages
#3
Newbie
Thread Starter
Join Date: Jun 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
2010 E550, 2012 S550
Workshop manual: http://workshop-manuals.com/mercedes...res/page_2283/ + next pages
#4
Newbie
Join Date: Jan 2017
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
2011 Mercedes Benz E550 Coupe
Turn it further, you'll have to force it. I was scared to do it too but it worked for me when I changed my thermostat. I have a 2011 coupe, same set up. Hope this helps, good luck!