2015 Rear Diffuser not sitting properly
#1
Junior Member
Thread Starter
2015 Rear Diffuser not sitting properly
Hi All,
I noticed the right had side of the rear diffuser on my wife's 2015 A207 isn't clipped in and I had a search on Youtube last night for a fitting video but couldn't find anything that showed if I just give it a whack in with my hand or a rubber mallet or if I need to undo any bolts and finesse it back into place then tighten up the bolt....so can anyone advise please?
It's only this section shown in the picture above the RH exhaust and down to the side, I just don't want to break any of the clips by trying to force it in...
Thanks in advance
I noticed the right had side of the rear diffuser on my wife's 2015 A207 isn't clipped in and I had a search on Youtube last night for a fitting video but couldn't find anything that showed if I just give it a whack in with my hand or a rubber mallet or if I need to undo any bolts and finesse it back into place then tighten up the bolt....so can anyone advise please?
It's only this section shown in the picture above the RH exhaust and down to the side, I just don't want to break any of the clips by trying to force it in...
Thanks in advance
The following users liked this post:
hotbaws (11-22-2022)
#3
Junior Member
Thread Starter
If it's not a straight forward whack back in job I'll take it to my local body shop but hopefully it's something I can do myself
#4
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Provide VIN I will pull part # to see if I can find an image of how it's mounted from behind.
The following users liked this post:
hotbaws (11-23-2022)