E-Class (W123) 1976-1986: 240D, 280E, 300D, 300TD, 300CD

I could not believe my eyes!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-17-2008, 11:15 AM
  #1  
Junior Member
Thread Starter
 
Benzguy604's Avatar
 
Join Date: Nov 2008
Location: Vancouver Canada and Darwin Australia
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
126,123
I could not believe my eyes!

The last few days up here in the north west have been pretty cold,so yesterday morning I decided to go and start both cars to let them warm up.While they were warming up it was time to remove some snow that had accumulated over night on both cars...All of a sudden I notice a large puddle under the 123,at first I thought it would have been water from melting snow.then I approached and immediately noticed that it was engine oil
I didn't even know if I had enough time to run around the car and shut the ignition off....But I did.
And this is what I found being the culprit...
The stud holding the oil filter lid in place unscrewed it self letting all of the oil out of the engine!And it only took a couple of minutes.Damn was I lucky or not.I have ordered a new nut and stud and will replace it all tomorrow on my day off. And will also be buying a new tube of RED lock tight.
Cheers
Dan
Vancouver Canada
Attached Thumbnails I could not believe my eyes!-img_0004.jpg   I could not believe my eyes!-img_0005.jpg   I could not believe my eyes!-img_0006.jpg   I could not believe my eyes!-img_0007.jpg  
Old 02-11-2009, 08:50 PM
  #2  
Junior Member
 
mike-81-240D's Avatar
 
Join Date: Feb 2009
Location: Kirkland (seattle) washington
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
1981 300D euro manual, looking for a 94-95 E320 kombi
same exact thing happened to the po of my 240D but he didn't know and he drove like that for 2 days till it seized, now i have it but i only have three clyinders working and way high oil preassure at idle and way low at crusing speed.
Old 02-17-2009, 12:10 AM
  #3  
Junior Member
Thread Starter
 
Benzguy604's Avatar
 
Join Date: Nov 2008
Location: Vancouver Canada and Darwin Australia
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
126,123
Originally Posted by mike-81-240D
same exact thing happened to the po of my 240D but he didn't know and he drove like that for 2 days till it seized, now i have it but i only have three clyinders working and way high oil preassure at idle and way low at crusing speed.

Its not a pretty site!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: I could not believe my eyes!



All times are GMT -4. The time now is 12:30 AM.