Show me your Before and After pics
#151
MBWorld Fanatic!
Originally Posted by Makahveli
Ebennz,
I love offroading in my explorer too, my winter time vehicle. Alot of guyz here just don't understand offroading, its just so cool!!!
I love offroading in my explorer too, my winter time vehicle. Alot of guyz here just don't understand offroading, its just so cool!!!
#153
Senior Member
Join Date: Nov 2001
Location: west virginia
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
smokies
i like/love forest road driving. i higher and more remote the better.
if i had a rear locker, i could really have some fun.
i've been to tellico and that is just insane. it's very cool, but to me over the top. rock crawling is ok, but i like to get somewhere.
when i was in colorado a few years ago, we took the durango/silverton narrow gauge train trip NORTH. the beauty can't be described.
from silverton we drove to animas forks, abandoned silver mine town.
that was some wheelin'.
i just wish i could have driven up cinnamon pass[about 14,000' elevation]. we were with older relatives.
if my explorer ever has 22" of front wheel travel, PLEASE RADIO THE PARK RANGER! I'VE GONE A HILL, SEND HELP
i like/love forest road driving. i higher and more remote the better.
if i had a rear locker, i could really have some fun.
i've been to tellico and that is just insane. it's very cool, but to me over the top. rock crawling is ok, but i like to get somewhere.
when i was in colorado a few years ago, we took the durango/silverton narrow gauge train trip NORTH. the beauty can't be described.
from silverton we drove to animas forks, abandoned silver mine town.
that was some wheelin'.
i just wish i could have driven up cinnamon pass[about 14,000' elevation]. we were with older relatives.
if my explorer ever has 22" of front wheel travel, PLEASE RADIO THE PARK RANGER! I'VE GONE A HILL, SEND HELP
Last edited by ebennz; 10-06-2005 at 12:16 PM.
#154
Senior Member
Join Date: Jan 2005
Location: Bryson City NC
Posts: 314
Likes: 0
Received 1 Like
on
1 Post
93 300SE Rauch "Smoke"
Well Pard ! We got lots of woodsy twisty roads right here! We are just east of Tellico ! in fact I see them crawlers headin down the fourlane here on there way to bust up some nice rigs!
Mighty pretty country here!
There's one of those roads right there!!!
Smokie
![hammer](https://mbworld.org/forums/images/smilies/bonk.gif)
![hammer](https://mbworld.org/forums/images/smilies/bonk.gif)
![hammer](https://mbworld.org/forums/images/smilies/bonk.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
Smokie
#155
Senior Member
Join Date: Nov 2001
Location: west virginia
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
my explorer at mt mitchell state park upper parking lot.
mt mitchell is highest peak on the east coast, 6684'
how about the ford [OE austraila] clear corners?
mt mitchell is highest peak on the east coast, 6684'
how about the ford [OE austraila] clear corners?
![](http://www.fordtruckworld.com/gallery/xplrxltsport/447787.jpg)
#156
MBWorld Fanatic!
Join Date: Oct 2004
Location: Orange County, CA
Posts: 5,816
Likes: 0
Received 0 Likes
on
0 Posts
W124's
back on topic...
Okay, here's my before and after pictures. I'll include pictures from the whole build up process until now.![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
When my baby was all stock and clean.
![](http://img306.imageshack.us/img306/9392/013qr.jpg)
Blacked Out Grill
Smoked Corned Lights installed
![](http://img306.imageshack.us/img306/9760/041tm.jpg)
![](http://img306.imageshack.us/img306/8780/053fi.jpg)
Interior Wood covered in Silver
Smoked Taillights
![](http://img306.imageshack.us/img306/8236/081ra.jpg)
Car Lowered
![](http://img306.imageshack.us/img306/6081/093te.jpg)
Smoked Euro Lights Installed
![](http://img306.imageshack.us/img306/4396/103hs.jpg)
Wheels Added and what it looks like today
![](http://img304.exs.cx/img304/1095/dsc05751small8kq.jpg)
![](http://img304.exs.cx/img304/607/dsc05756small2yx.jpg)
![](http://img304.exs.cx/img304/3789/dsc05757small5ya.jpg)
![](http://img304.exs.cx/img304/9038/dsc05758small1gn.jpg)
![](http://img304.exs.cx/img304/8866/dsc05759small2hf.jpg)
that's basically it, but I'm not done! More crazy changes on the way.
Okay, here's my before and after pictures. I'll include pictures from the whole build up process until now.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
When my baby was all stock and clean.
![](http://img306.imageshack.us/img306/9392/013qr.jpg)
![](http://img306.imageshack.us/img306/5856/025lf.jpg)
Blacked Out Grill
![](http://img306.imageshack.us/img306/2319/039wh.jpg)
Smoked Corned Lights installed
![](http://img306.imageshack.us/img306/9760/041tm.jpg)
![](http://img306.imageshack.us/img306/8780/053fi.jpg)
Interior Wood covered in Silver
![](http://img306.imageshack.us/img306/319/062xf.jpg)
![](http://img306.imageshack.us/img306/7646/079mx.jpg)
Smoked Taillights
![](http://img306.imageshack.us/img306/8236/081ra.jpg)
Car Lowered
![](http://img306.imageshack.us/img306/6081/093te.jpg)
Smoked Euro Lights Installed
![](http://img306.imageshack.us/img306/4396/103hs.jpg)
Wheels Added and what it looks like today
![](http://img304.exs.cx/img304/1095/dsc05751small8kq.jpg)
![](http://img304.exs.cx/img304/607/dsc05756small2yx.jpg)
![](http://img304.exs.cx/img304/3789/dsc05757small5ya.jpg)
![](http://img304.exs.cx/img304/9038/dsc05758small1gn.jpg)
![](http://img304.exs.cx/img304/8866/dsc05759small2hf.jpg)
that's basically it, but I'm not done! More crazy changes on the way.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#158
Super Member
Join Date: Dec 2002
Location: Sherman Oaks
Posts: 882
Likes: 0
Received 2 Likes
on
2 Posts
1992 300CE AMG Hammer Replica, 2004 C240, 2015 ML350
standard center caps will not fit those wheels. unfortunately they are smaller than standard.
All that car needs now chris...
Center caps... monotoned paint, and exhaust...
Body kits are optional, but the car looks great.
All that car needs now chris...
Center caps... monotoned paint, and exhaust...
Body kits are optional, but the car looks great.
#160
MBWorld Fanatic!
Join Date: Oct 2004
Location: Orange County, CA
Posts: 5,816
Likes: 0
Received 0 Likes
on
0 Posts
W124's
Originally Posted by ebennz
chris
outside looks nice...how many times did your right front tire rub on the way home?
will standard center caps fit those wheels?
outside looks nice...how many times did your right front tire rub on the way home?
will standard center caps fit those wheels?
Like Alon said, the standard center caps won't fit the wheels. MB standard is 3" while mine is 2.5" inches. Sucks ***** I know.
![Frown](https://mbworld.org/forums/images/smilies/frown.gif)
Originally Posted by ashman
standard center caps will not fit those wheels. unfortunately they are smaller than standard.
All that car needs now chris...
Center caps... monotoned paint, and exhaust...
Body kits are optional, but the car looks great.
All that car needs now chris...
Center caps... monotoned paint, and exhaust...
Body kits are optional, but the car looks great.
Also, I talked to Sanders. He will be doing the monotoned paint job for me. Hopefully if I'm lucky I'll be able to get ahold of a AMG kit soon. If not, I'll either color match the impact strips or color match the panels and bumpers to the car.
#162
Super Member
Join Date: Dec 2002
Location: Sherman Oaks
Posts: 882
Likes: 0
Received 2 Likes
on
2 Posts
1992 300CE AMG Hammer Replica, 2004 C240, 2015 ML350
RE: the rubbing. you need to put in the fender spacer kit, and definately need to roll the fenders. your car is lower than mine int he front, way lower. mine rubs only under I would say 85% compression in the front, though I am willing to bet that with the front getting rolled, that would take care of it. rear needs to be rolled a bit mroe, but it dosnt bug me much.
Get those fender spacers!
Get those fender spacers!
#163
MBWorld Fanatic!
Join Date: Oct 2004
Location: Orange County, CA
Posts: 5,816
Likes: 0
Received 0 Likes
on
0 Posts
W124's
Yeah, Ben sent out that kit out for me today. Hopefully I'll get it next week around monday or tuesday. Is it easy to remove that lower panel? I'm still wondering how I would remove the bumper to put a spacer there.
#165
MBWorld Fanatic!
Join Date: Oct 2004
Location: Orange County, CA
Posts: 5,816
Likes: 0
Received 0 Likes
on
0 Posts
W124's
Actually, it's not paint. lol
I would of painted but I thought to myself, I might get tired of the silver one day and be stuck with it. So I basically went to a graphics shop and ordered a 2 x 5 feet of silver decal vinyl!
It was only 10 bucks, in my opinion, best 10 bucks ever spent. I think i might do black now.
I would of painted but I thought to myself, I might get tired of the silver one day and be stuck with it. So I basically went to a graphics shop and ordered a 2 x 5 feet of silver decal vinyl!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#167
MBWorld Fanatic!
chris' prob as i told him is he is OUT of suspension travel. he said his car in turns is on the bump stops. which means NO MORE travel. he said his springs are new and he has spring pads. putting fender spacers doesnt solve the REAL issue of being out of suspension travel.
the cars needs to go up and inch or two to regain some travel on hard corners.
the cars needs to go up and inch or two to regain some travel on hard corners.
#168
Member
Join Date: Sep 2004
Location: Kentucky
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
500E's
Chris,
I have a piece of that setting in the car with a knife right now. Only problem I had was the tape still showed up any cracks in the clear coat over the zebrano. If you had cracks did you let them go or dremal them smooth?
I tried laminating carbon fibre on a test panel that I bought on ebay but found that unless I sanded ALL of the previous clear and wood off, everything would be too high. Also, I was not excited about digging around in the dash for the three pieces attached to the dash.
I have a piece of that setting in the car with a knife right now. Only problem I had was the tape still showed up any cracks in the clear coat over the zebrano. If you had cracks did you let them go or dremal them smooth?
I tried laminating carbon fibre on a test panel that I bought on ebay but found that unless I sanded ALL of the previous clear and wood off, everything would be too high. Also, I was not excited about digging around in the dash for the three pieces attached to the dash.
#169
MBWorld Fanatic!
Join Date: Apr 2005
Location: Long Beach, Ca
Posts: 2,849
Likes: 0
Received 2 Likes
on
2 Posts
lots of cars
I am going to re-finish mine since now i got a hvlp paint gun and im going to use an automotive clear and paint all the wood high gloss black. I like what i did with the wood but im getting tired of it and it's time for a new look. I hope to be done with the car by x-mas! Also those screens were going to be installed but im just at that point a mercedes owner wants to go back to original.
Last edited by YNVDIZW124; 10-08-2005 at 03:08 PM.
#171
MBWorld Fanatic!
Join Date: Apr 2005
Location: Long Beach, Ca
Posts: 2,849
Likes: 0
Received 2 Likes
on
2 Posts
lots of cars
That's just paint with an acrylic clear. I never seen any mb with high gloss black or i was thinking of getting a black burlwood laminate and clear coating it so it could look like real burlwood.
#172
Member
Join Date: Sep 2004
Location: Kentucky
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
500E's
I think the gloss black would look great. I think I am going with a Pearl Black to match the outside of the car but if I start with graphic tape, I can experiment for a bit.
Good luck with the paint.
Good luck with the paint.
#174
MBWorld Fanatic!
Join Date: Oct 2004
Location: Orange County, CA
Posts: 5,816
Likes: 0
Received 0 Likes
on
0 Posts
W124's
Originally Posted by McBear300E
Chris,
I have a piece of that setting in the car with a knife right now. Only problem I had was the tape still showed up any cracks in the clear coat over the zebrano. If you had cracks did you let them go or dremal them smooth?
I tried laminating carbon fibre on a test panel that I bought on ebay but found that unless I sanded ALL of the previous clear and wood off, everything would be too high. Also, I was not excited about digging around in the dash for the three pieces attached to the dash.
I have a piece of that setting in the car with a knife right now. Only problem I had was the tape still showed up any cracks in the clear coat over the zebrano. If you had cracks did you let them go or dremal them smooth?
I tried laminating carbon fibre on a test panel that I bought on ebay but found that unless I sanded ALL of the previous clear and wood off, everything would be too high. Also, I was not excited about digging around in the dash for the three pieces attached to the dash.
#175
Member
Join Date: Sep 2004
Location: Kentucky
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
500E's
Since the car is Pearl Black I may go for a dark Charcoal to go with the grey interior. Other choices are silver (which I got the sample a month ago) and black). I also picked up a 300SEL this week which has the same problem (foggy zebrano) so I might just experiment. This is beginning to sound like fun.
My only problem is that with the sportline, I have the two "rolltop" console boxes between front seats and back seats which are going to require something. My thoughs on them are either aluminum to replace the wood which would tend to make me go to silver for the console or take them out and paint them black, praying they don't stick together.
My only problem is that with the sportline, I have the two "rolltop" console boxes between front seats and back seats which are going to require something. My thoughs on them are either aluminum to replace the wood which would tend to make me go to silver for the console or take them out and paint them black, praying they don't stick together.