My 300E 12v Turbo Project
12-24-2006, 05:44 AM
#1
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
My 300E 12v Turbo Project
Mercedes Benz 300E 12v 1987
M103 original engine
Compression 8,7
Holset H1E turbocharger
Home made extractor manifold
3" aliminum home made intake pipes
IC
50mm wastegate
BOV
3" home made exhaust with 1 muffler
Megasquirt II v3,0 stanalone magament egine system
EDIS6 ignition
680cc MSD injectors
Sasch racing 2 plate Clutch 900Nm
500E brakes with black diamond plates
190 2,3 16v LSD Diff
Getrag transmission 717404
1,7bar (E85) 560Hp/700Nm
20 degree with 1,7 bar
M103 original engine
Compression 8,7
Holset H1E turbocharger
Home made extractor manifold
3" aliminum home made intake pipes
IC
50mm wastegate
BOV
3" home made exhaust with 1 muffler
Megasquirt II v3,0 stanalone magament egine system
EDIS6 ignition
680cc MSD injectors
Sasch racing 2 plate Clutch 900Nm
500E brakes with black diamond plates
190 2,3 16v LSD Diff
Getrag transmission 717404
1,7bar (E85) 560Hp/700Nm
20 degree with 1,7 bar
Drool
12-24-2006, 08:07 AM
#5
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Of caurse I have many pictures
I begin with E30 info
BMW 325 Supercharger 1988
m20b25
rotrex c30 supercharger
setrab oilcooler to supercharger
intercooler
680cc MSD injectors
Walbro 255hp pump
MS II v3,0
edis6 ignition
Trending Topics
12-24-2006, 10:06 AM
#8
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!
Dyno will be sometime in spring when i am done with my new engine and new turbokit. Caurse I allready sold my engine and the turbokit complete with exhaust and pipes and standalone system.
So I going to build a new stainless manifold, new intakemanifold/plenum and 3,5" exhaust with 4" downpipe and use a bigger parts to get over 800Hp
I used to take:
Black steel (3mm thick) extractor manifold: around 800-850$ depens of valuta curs
Stainless extractor manifold (2mm thick acidfast): 1100-1200$
Here is a new baby eater GT45Hybrid (900-1000Hp)
Last edited by PUMPISH; 12-24-2006 at 10:09 AM.
12-24-2006, 06:23 PM
#10
Member
Thread Starter
Join Date: Dec 2006
Location: Sweden/Stockholm
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!!!
Yes I have those 2 films on youtube
http://www.youtube.com/watch?v=zxpZToDC21E
http://www.youtube.com/watch?v=vjjSrkhcQFI
And 1 clip with my wintercar 190e 2,6
http://www.youtube.com/watch?v=8vIWAYrW5KQ
Yes I have those 2 films on youtube
http://www.youtube.com/watch?v=zxpZToDC21E
http://www.youtube.com/watch?v=vjjSrkhcQFI
And 1 clip with my wintercar 190e 2,6
http://www.youtube.com/watch?v=8vIWAYrW5KQ
12-25-2006, 08:46 PM
#13
Super Member
Join Date: Oct 2005
Location: Miami, Maracaibo, Bogota
Posts: 846
Likes: 0
Received 1 Like
on
1 Post
not stock.
very nice project.... i like:
widebody / body kit
engine & turbo setup
seats, & many other things....
i dont like the graphic& the interior color, but mabe thats me... I tend to go for the more "elegant" motorsport look.
props on a cool project & good luck on the quest for 1000hp
widebody / body kit
engine & turbo setup
seats, & many other things....
i dont like the graphic& the interior color, but mabe thats me... I tend to go for the more "elegant" motorsport look.
props on a cool project & good luck on the quest for 1000hp
