I did it!!!
#1
Thread Starter
Super Member
Joined: Sep 2006
Posts: 659
Likes: 0
From: New Jersey
1989300CE(sold),1996Accord,02CBR954
I did it!!!
Well I achieved the altimate goal of any w124 owner...I have a smooth cold start a good steady Idle.For how long? I dont know, but its been done.
I cleaned my ICV and replaced the rubbers( those new rubbers are a ***** to change).I also changed out my fuel pump relay.I was gonna change my temp switch but ran out of light.I also tightened some hoses.
I was suppose to change my fan bearings housing sunday but after struggling with this easy **** I'm not in the mood.
I cleaned my ICV and replaced the rubbers( those new rubbers are a ***** to change).I also changed out my fuel pump relay.I was gonna change my temp switch but ran out of light.I also tightened some hoses.
I was suppose to change my fan bearings housing sunday but after struggling with this easy **** I'm not in the mood.
#6
Thread Starter
Super Member
Joined: Sep 2006
Posts: 659
Likes: 0
From: New Jersey
1989300CE(sold),1996Accord,02CBR954
Thanks guys,Ill tell you what, those hoses get real hard and expand quite a bit its good to change em.My relay was shot too.there was something that was jiggling around inside of it.
#7