berti_00

i have ordered my V4 wald front bumper but without the original fogs... i wanted something with Halo's on em.. anyways would these be somewhat close to the pattern of the fogs for the Wald v4 exchange.. maybe with a little modification?

1st- http://cgi.ebay.com/ebaymotors/ws/eB...ksid=p3907.m32

2nd- http://cgi.ebay.com/ebaymotors/ws/eB...ksid=p3907.m32

crr1612

iunno bout the patterns, but they look mad nice

berti_00

yeah seached for a while and narrowed my choice to those they are pretty sick... and also seem to be sort of same pattern as the wald but i dont know for sure...

here is a front pic of the bumper from the Wald V4 exhange

http://www.waldexchange.com/W124E95V4.html

ZedStyle

wait til it gets here, then measure the openings, and see if the sellers can give you dimensions of those fogs... i went out and bought a set that i SWORE would fit into my bumper, got home, and they were way off... it's a lot harder to return on ebay than to the store down the street...

chewy4x4

Go and mesure everything find a grand cherokee and measure the openings those lights go in then measure your front when It comes in. The F150 will be to big But hell measure it too. Remember Measue twice cut once. Or in this case measure 20-30 times and place an order once (then hope you measured enough). Oh and if it works let us all know (pictures) so we can group order some V4's

joef

You can use one of the light from a 210, that's what I did with mine. And just retrofit a unit. The 210 light is the same pattern as the wald unit.

berti_00

you mean like this one?

http://cgi.ebay.com/ebaymotors/MERCE...spagenameZWDVW

joef

#1 for the E class looks about right, but you would need to physically match it to the bumper to make sure.

ZedStyle

joef, don't you have the Wald EX front? i thought you did... berti is getting the V4, so i'm not sure if the openings will be the same...

STLe320

What would you go with on a stock bumber?

joef

I've got the V4 kit on my cabrio. I'm doing the EX kit on the wifes 94 E320 in the new year.

berti_00

hey joef soo the number 1 ones think are good?

joef

I remember it was an E class that worked. I would say it's a safe bet.

berti_00

i just ordered the number 1 lights so hopefuly they will work lol.. if not i'll have the bodyshop fill the old holes with kit and cut them to the ones i have? will that work?

STLe320

it should if they're not too big

ZorroAMG

which ever you do go with, have the body shop paint the flat plastic with a semi gloss black, that flat looks cheap.

berti_00

am saying if the whole of the fogs on the bumper is smaller and the fogs i just got are a bit longer... could they cut it alittle bit and make it fit in or whatever?
my WALD is here they just wont ship it at my house it has to be a fing Bodyshop adress

ZorroAMG

Use a dremel and trim the FOG to fit the hole. That would be the easiest.

berti_00

that would be a good idea too... i will see ones i get the fogs and ones i find a place to get my bumper too lol i dont get why wont they shipp it at my house?