Correct Part Number? Need help!!!
Thread Starter
Almost a Member!
Joined: Apr 2008
Posts: 31
Likes: 0
From: Wisconsin
95 Eclipse GST, 93 MB 300e
Correct Part Number? Need help!!!
I'm buying a new wiring harness.
I have a 1993 300e 2.8L, with the newer looking motor without the canister looking intake.
Vin is WDBEA28E2PB891579
The part number of what i bought is #124 440 56 32
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8058296598
Can someone please verify this for me?
Both my mechanic and the local dealers are completely neglectful to help! So i appreciate all the help i can get here.
I have a 1993 300e 2.8L, with the newer looking motor without the canister looking intake.
Vin is WDBEA28E2PB891579
The part number of what i bought is #124 440 56 32
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8058296598
Can someone please verify this for me?
Both my mechanic and the local dealers are completely neglectful to help! So i appreciate all the help i can get here.
Last edited by odelay17; Jun 24, 2008 at 06:20 PM.
Thread Starter
Almost a Member!
Joined: Apr 2008
Posts: 31
Likes: 0
From: Wisconsin
95 Eclipse GST, 93 MB 300e
I believe i figured it out. And that this is the correct harness. And that the harnesses are interchangeable between the 2.8 and 3.2 litre.
The part number the sellers gave me correspond with all the specs i have.
This should have been easy for me to find as there was a very limited amount of 2.8L
What threw me off was that i thought the older models were also 2.8L, but then realized that they are actually 2.6L and made it easier to distinguish between the old versus new motor.
I learned things today.
Thanks
The part number the sellers gave me correspond with all the specs i have.
This should have been easy for me to find as there was a very limited amount of 2.8L
What threw me off was that i thought the older models were also 2.8L, but then realized that they are actually 2.6L and made it easier to distinguish between the old versus new motor.
I learned things today.
Thanks
