Will fender rolling help?
Thread Starter
Senior Member
Joined: Jul 2009
Posts: 330
Likes: 0
1987 300E, 1995 C280
Will fender rolling help?
So i went all around even tires on my car to 225/55/16.. great choice for the rear (i think can even go wider)
rim size is 16 x 7
but the front.. the fender keeps scraping my tire.. and there is already a line on the tire from the fender and my fenders feel all rubbery
will rolling the front fender help at all? and if so where can i get it done legit in socal? thanks in advance!
rim size is 16 x 7
but the front.. the fender keeps scraping my tire.. and there is already a line on the tire from the fender and my fenders feel all rubbery
will rolling the front fender help at all? and if so where can i get it done legit in socal? thanks in advance!
Last edited by funkgab; Jul 4, 2010 at 03:07 AM.
MBWorld Fanatic!
Joined: Mar 2006
Posts: 1,246
Likes: 3
From: North NJ
94 Wagon and 94 Cabriolet
Et 34, 16x7 are not the variables you need to fix. 
If you have not rolled your fenders, it will give an improvement if the sides are the issue...sounds wide enough that could be. But if car was lowered, then height around sharp driveways would be what I just had to resolve by going from 2 to 4 bumps on the silver wagon.
If you have not rolled your fenders, it will give an improvement if the sides are the issue...sounds wide enough that could be. But if car was lowered, then height around sharp driveways would be what I just had to resolve by going from 2 to 4 bumps on the silver wagon.
Thread Starter
Senior Member
Joined: Jul 2009
Posts: 330
Likes: 0
1987 300E, 1995 C280
got my front fenders rolled.. the drivers side rarely scrapes.. only over bumps now but the passenger side for some reason still scrapes ALOT.. and with a passenger.. it scrapes too much haha.. im also not happy with the fender work they done :/ should have just sucked it up and drove to hms.. oh well.. *******s did not use a heat gun..
