95 E320 front crank seal
08-27-2010, 03:27 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2008
Location: Atlanta
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
95 E320, 2002 E430
95 E320 front crank seal
With 255k mi, it's leaking and I need to replace. Anyone know if it's worth the $40-$50 for the seal insert tool vs doing the job without it? Also, any other seals/gaskets that should be looked at/replaced while I have fan, radiator,etc out? Thanks in advance.
08-30-2010, 03:41 AM
#2
Senior Member
Join Date: Jun 2003
Location: Salem, OR
Posts: 302
Likes: 0
Received 1 Like
on
1 Post
08 Lexus GS350 AWD. 08 Lexus RX350 AWD - wife's. 94 MBZ E320 - still have it.
I replaced it a while ago. I removed it with a screwdriver bent itno a hook. I don't think you can replace anything else while you're at it.
09-01-2010, 09:21 AM
#3
Junior Member
Thread Starter
Join Date: Feb 2008
Location: Atlanta
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
95 E320, 2002 E430
Thanks Arnie. My parts guy suggested I buy an extra seal, in case I mess up the first one on the install. Has me worried the seal does not just tap in easily and that's why I'm wondering if I need the $40 insert tool.
09-01-2010, 03:16 PM
#4
Senior Member
Join Date: Jun 2003
Location: Salem, OR
Posts: 302
Likes: 0
Received 1 Like
on
1 Post
08 Lexus GS350 AWD. 08 Lexus RX350 AWD - wife's. 94 MBZ E320 - still have it.
I didn't have any problems with tapping the seal in. I applied some oil on the outside and made sure it went in straight.
Good luck.
Good luck.
