'90 300E ball joint replacement / tool questions
10-19-2010, 09:06 AM
#1
Member
Thread Starter
Join Date: Jul 2007
Location: Northwest NJ
Posts: 122
Received 0 Likes
on
0 Posts
'90 300E Blk/Tan
'90 300E ball joint replacement / tool questions
I have a '90 300E with a bad ball joint on the pass side. Need to know 2 things if someone could help......
1) Can they be removed with a "C" type ball joint removal tool such as this: http://www.harborfreight.com/3-in-1-...kit-38335.html ,or do they have to be pressed out/in using a hydraulic press?
2) What is the reccommended replacement part manufacturer. (i.e...Lemforder, Pex/Myley, etc...)
__________________
Andy_M
'90 W124 300E Black over Grey/Beige
'03 Porsche 986 Midnight Blue/Grey
'90 Nissan 300ZX NA Aztec Red / Black
1) Can they be removed with a "C" type ball joint removal tool such as this: http://www.harborfreight.com/3-in-1-...kit-38335.html ,or do they have to be pressed out/in using a hydraulic press?
2) What is the reccommended replacement part manufacturer. (i.e...Lemforder, Pex/Myley, etc...)
__________________
Andy_M
'90 W124 300E Black over Grey/Beige
'03 Porsche 986 Midnight Blue/Grey
'90 Nissan 300ZX NA Aztec Red / Black
