EGR Vacuum Line
#1
Junior Member
Thread Starter
Join Date: Apr 2011
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
1991 MB 300E W124
EGR Vacuum Line
I was changing a leaky valve cover gasket on my 1991 300E 3.0L over the weekend when I discovered a vacuum line that was not attached to anything and just tucked away by someone (not me).
Assuming the flying saucer shaped thing sitting on top of my exhaust manifold is my EGR valve, where does the vacuum line coming out of it attach to? Please be specific as I'm a novice to this whole DIY thing.
Nick
Assuming the flying saucer shaped thing sitting on top of my exhaust manifold is my EGR valve, where does the vacuum line coming out of it attach to? Please be specific as I'm a novice to this whole DIY thing.
Nick
#2
MBWorld Fanatic!
http://i245.photobucket.com/albums/g...t/IMG_1606.jpg
On that M104 engine (later m104) its the far back one. There should be a small brass nipple on the EGR for attaching the rubber line.
On that M104 engine (later m104) its the far back one. There should be a small brass nipple on the EGR for attaching the rubber line.