Tutorial on installing corner lights?
Thread Starter
Almost a Member!
Joined: Jul 2004
Posts: 32
Likes: 0
From: SAN FRANCISCO, CA --->THE BAY AREA
1989 Mercedes Benz 300E
Tutorial on installing corner lights?
Wassup yall. I just ordered some new corner lights for my W124. They are grey/smoked corner lights. I was wondering if anyone knows any place I can get a tutorial on removing my stock amber corner lights and putting in the new grey/smoked corner lights. I am not sure if I need any special tools or anything. Anything would help!
Here's the corner lights:
http://cgi.ebay.com/ebaymotors/ws/eB...ME:B:EOAB:US:6
Here's the corner lights:
http://cgi.ebay.com/ebaymotors/ws/eB...ME:B:EOAB:US:6
MBWorld Fanatic!
Joined: Aug 2002
Posts: 1,005
Likes: 32
From: Germany
'00 S320 W220, '98 A160 W168/ sold in 2005 '86 260 E W124 '90 260E W124
Very simple, takes no special tools or more than 2 minute per side.
*Open the hood
*check from the inside where corner are
*there is the small plasic flap you can also find on your new once
*push it sideways and the corner pops out of the fendor
*pull off the wiring
*plug it into the new once
*insert the corner into the fendor
*watch for the small clips (on the side of the corner) to slide into the counter parts on the side of the headlights
READY
*Open the hood
*check from the inside where corner are
*there is the small plasic flap you can also find on your new once
*push it sideways and the corner pops out of the fendor
*pull off the wiring
*plug it into the new once
*insert the corner into the fendor
*watch for the small clips (on the side of the corner) to slide into the counter parts on the side of the headlights
READY
Member
Joined: May 2004
Posts: 157
Likes: 0
From: Fort Lee, New Jersey
2008 E92 M3
Originally Posted by bamberger_1
Very simple, takes no special tools or more than 2 minute per side.
*Open the hood
*check from the inside where corner are
*there is the small plasic flap you can also find on your new once
*push it sideways and the corner pops out of the fendor
*pull off the wiring
*plug it into the new once
*insert the corner into the fendor
*watch for the small clips (on the side of the corner) to slide into the counter parts on the side of the headlights
READY
*Open the hood
*check from the inside where corner are
*there is the small plasic flap you can also find on your new once
*push it sideways and the corner pops out of the fendor
*pull off the wiring
*plug it into the new once
*insert the corner into the fendor
*watch for the small clips (on the side of the corner) to slide into the counter parts on the side of the headlights
READY
yea its a very easy and simple process, takes u about 5 min to do both...just dont press too hard on the plastic flap or they will break...
