E-Class (W210) 1995-2002: E 200, E 220D, E 240, E 290TD, E 300TD, E 200, E 240, E 280, E 320, E 420, E 430 (Wagon, Touring, 4Matic)

Doesn't start after car wash

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 03-26-2008, 05:25 PM
  #1  
Almost a Member!
Thread Starter
 
KenC's Avatar
 
Join Date: Jan 2002
Location: New York
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
E320 4matic wagon
Doesn't start after car wash

I have a 2000 E320 4matic wagon with 100k miles. Generally runs like a top. A few days ago drove abt 30 miles and parked it. An hour later returned the 30 miles and got the car washed. They pulled it out of the car wash and turned off the ignition. The car would not restart. Lights go on on the dash, horn worked, but no starter engagement. Not a peep. After about an hour, she started right up. Any suggestions on how/what to investigate?

tks in advance,
Ken
Old 03-26-2008, 06:22 PM
  #2  
MBWorld Fanatic!
 
MARK CUMMINS's Avatar
 
Join Date: Nov 2001
Location: Jacksonville Florida
Posts: 3,858
Likes: 0
Received 3 Likes on 3 Posts
209/W210 Estate /W211 modded by MBENZNL
Sounds like the crank position sensor is Defective



Also Check the Starter to see IF it gets power from the Ignition Switch with the key on. ..defective windings and or the defective starter solenoid

Last edited by MARK CUMMINS; 03-26-2008 at 07:28 PM.
Old 03-26-2008, 08:40 PM
  #3  
MBWorld Fanatic!
 
ohlord's Avatar
 
Join Date: Apr 2007
Posts: 6,171
Received 15 Likes on 11 Posts
300E a couple 1994 w124wagon E320 Wagon/,1971MGB Track/Rally, MG Midget Autocross ,2000 E320 wagon.
bad

cps and it would still turn over,you state it did not turn over.Check the battery charge,condition of terminals on the battery.
Old 03-28-2008, 01:13 AM
  #4  
Senior Member
 
georgedaman's Avatar
 
Join Date: Jun 2006
Location: Toronto Ont Canada
Posts: 375
Received 0 Likes on 0 Posts
GL350
I know its kind of off the category but i had W124 with exact same problem.That car had a small black box on the driver side fender..under the hood with a vacum hose and some electrical connector going into it.Some kind of measuring thing.When it got moist under the hood the car just wouldn't start at all.I had to push it off the washing booth and left it there.Took overnite to dry out.Ofcourse at the time i didn't know what the problem was

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Doesn't start after car wash



All times are GMT -4. The time now is 10:45 AM.