Help!! Negative camber on 96 E320
Thread Starter
Newbie
Joined: Dec 2008
Posts: 2
Likes: 0
E-320
Help!! Negative camber on 96 E320
I recently purchased an 96 E320 from a friend of mine and it has the Eibach 2540.001 springs on 18" wheels.
The problem is that it has negative camber and wearing tires. I don't want to replace the tires every couple of months..
I spent the about 3 hours yesterday re-installing the original front springs and I don't like the look. So before I put the Eibach's back in is there a solution to the negative front camber?
The previous owner said it was at maximum adjustment.
Can this be fixed?
The problem is that it has negative camber and wearing tires. I don't want to replace the tires every couple of months..
I spent the about 3 hours yesterday re-installing the original front springs and I don't like the look. So before I put the Eibach's back in is there a solution to the negative front camber?
The previous owner said it was at maximum adjustment.
Can this be fixed?
Last edited by ampedbikes; Dec 1, 2008 at 01:06 PM. Reason: Grammar
Almost a Member!
Joined: Mar 2008
Posts: 33
Likes: 0
From: powell ohio
98 E320 99 E430 w/mods
camber issue
Not with the stock parts......Get K-mac units or lensolo links for the rear and mercedes camber bolts for the fronts.Speedybenz web site shows install of rear links if you want to see what is involved.... If you need the rears K-mac is located in Australia. Lensolo can be found at benzworld.org good luck
Last edited by ETP; Dec 1, 2008 at 01:43 PM. Reason: add
lol
