E-Class (W210) 1995-2002: E 200, E 220D, E 240, E 290TD, E 300TD, E 200, E 240, E 280, E 320, E 420, E 430 (Wagon, Touring, 4Matic)

1999 E200CDI 2.2

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 09-19-2009, 05:56 AM
  #1  
Newbie
Thread Starter
 
spacetank's Avatar
 
Join Date: Sep 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
E 200 CDI
1999 E200CDI 2.2

Hi. I have E200CDI 2.2 1999. I have problem with the power on my car and a lot of black smoke from the exhaust when I push the gas pedal harder. I did the car diagnostic it shows MAF sensor problem. I cleaned it and there was no change. Then I went to parts shop and exchanged it with couple of new ones,but it didn't show any difference,so i've put the old one back in. I'm wondering,where could the problem be. It's something related with the MAF,but it's not the sensor. Did somebody have the same problem,or does somebody know what else I could do ...
Thanx in advance!
Old 09-19-2009, 12:18 PM
  #2  
Super Member
 
TMAllison's Avatar
 
Join Date: Jun 2008
Location: Bay Area, CA
Posts: 835
Likes: 0
Received 1 Like on 1 Post
09' E320
What codes were present?

Did you use a dealer MAF replacement part or an aftermarket insert?
Old 09-19-2009, 12:27 PM
  #3  
Newbie
Thread Starter
 
spacetank's Avatar
 
Join Date: Sep 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
E 200 CDI
the code is 0100 . and I have bosch MAF and I've tried a Bosch also
Old 09-19-2009, 12:38 PM
  #4  
Super Member
 
TMAllison's Avatar
 
Join Date: Jun 2008
Location: Bay Area, CA
Posts: 835
Likes: 0
Received 1 Like on 1 Post
09' E320
That code usually points to the MAf.

A new MAF needs to adapt to the engine. That can be done using MB's SDS scanner, OR by driving for ~1 hour. In rare instances, SDS must be used.
Old 09-21-2009, 11:46 AM
  #5  
Former Vendor of MBWorld
 
ALLDATAdiy INFO's Avatar
 
Join Date: Jan 2009
Location: California
Posts: 253
Likes: 0
Received 0 Likes on 0 Posts
Mercedes
Originally Posted by spacetank
Hi. I have E200CDI 2.2 1999. I have problem with the power on my car and a lot of black smoke from the exhaust when I push the gas pedal harder. I did the car diagnostic it shows MAF sensor problem. I cleaned it and there was no change. Then I went to parts shop and exchanged it with couple of new ones,but it didn't show any difference,so i've put the old one back in. I'm wondering,where could the problem be. It's something related with the MAF,but it's not the sensor. Did somebody have the same problem,or does somebody know what else I could do ...
Thanx in advance!
How much black smoke?

How many Miles on it?
Old 09-22-2009, 05:08 AM
  #6  
Newbie
Thread Starter
 
spacetank's Avatar
 
Join Date: Sep 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
E 200 CDI
Originally Posted by ALLDATAdiy INFO
How much black smoke?

How many Miles on it?
It's about 350 000km. It smokes mostly when I press harder. It should be some wiring problem,because sometimes the car goes perfect without any smoke.When the car is parked and the engine is running it starts smoking a lot.
The smoke smells like diesel,not like oil.
Old 09-22-2009, 05:10 AM
  #7  
Newbie
Thread Starter
 
spacetank's Avatar
 
Join Date: Sep 2009
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
E 200 CDI
Are there any fuses,a relay or anything for the MAF?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: 1999 E200CDI 2.2



All times are GMT -4. The time now is 01:48 PM.