front wheel bearing replacement
10-05-2009, 11:09 PM
#1
Newbie
Thread Starter
Join Date: Sep 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
96 e320
front wheel bearing replacement
ok guys, I have it torn down to the hub assembly, spindle is still on the car. I am having trouble getting the cover off where the bearings are, dust cap.... so I just need to beat it off or is there another way I am not trying. any help is appreciated!!
10-06-2009, 12:47 PM
#2
MBWorld Fanatic!
a few tars
along the edge with a screw driver blade get it in enough to pry it off.
Or you can get the cupped cap pliers and they will lift it off easily.
Or you can get the cupped cap pliers and they will lift it off easily.
10-06-2009, 12:48 PM
#3
MBWorld Fanatic!
DON'T
hammer it off. You need it to seat fully and seal the new bearing from dirt.
Won't do it if all dented up
Won't do it if all dented up
10-07-2009, 01:40 PM
#5
Super Member
Claws of a hammer in grooves with a 1" spacer behind the head of the hammer to lever it off.
How are you planning to measure end play after installing the new bearings?
How are you planning to measure end play after installing the new bearings?
10-07-2009, 09:42 PM
#6
Senior Member
Join Date: Jan 2007
Location: Südflorida
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
'99 E430, '05 ML500, '15 GLK350
10-20-2009, 02:32 PM
#7
MBWorld Fanatic!
Join Date: May 2008
Location: Pittsburgh,PA, Cambridge, Ontario, CN
Posts: 1,072
Likes: 0
Received 4 Likes
on
3 Posts
2003 S210 3.8L Brabus wagon
Dealer replacement cups are very cheap should you damage one. Don't forget a good packing tool and the green grease from the dealer.
