opened pandora's box on my w210
04-26-2011, 06:31 PM
#1
Member
Thread Starter
Join Date: Jul 2010
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
e320 4matic wagon
opened pandora's box on my w210
Visited my dad's shop this past weekend to get my w210's motor and tranny mounts replaced and also looked at for a strange noise coming from pass front wheel well only on hard left hand turns @ 40+mph upon acceleration. Sounded to me like my 18s were rubbin on something, figured it would be a quick fix...boy I was wrong. To make a long story short....it ended up being an exhaust clamp towards the rear of the exhaust that was not rotated properly and when the engine was torqued on left-hand turns it was vibrating against the tranny tunnel....strange 
In the chase of this noise also replaced, my wheel bearing, rebuilt the 4matic front half shaft cause the boot had a rip in it and the rear ujoint had a notchyness to it. Also replaced outer cv joint boot for a rip in it too. Anywho...just thought I would share my experience.
In the chase of this noise also replaced, my wheel bearing, rebuilt the 4matic front half shaft cause the boot had a rip in it and the rear ujoint had a notchyness to it. Also replaced outer cv joint boot for a rip in it too. Anywho...just thought I would share my experience.
