mese23

Car MB W210, motor OM612. I replaced the Injector nozzle seals. Now the engine will no longer start. Fuel comes from the pipes of all nozzles, so there should be no air in the system anymore. I cleaned the nozzle holes in the old way, so I filled the nozzle holes with paper wakes and made a short start to fly the huts. Thus, the nozzles were not attached to their connectors. Could this cause the engine not to start?

Plutoe

No

mese23

I think the immobilizer has gone on. There is no power for the reels of the nozzles. How do I get off the anti -driving immobilizer?

Plutoe

you now think, that position gets expensive why not think of a formal diagnosis, like a factory scan, repeat factory scan not your girlfriends scanner that does not have the capability to look at the CAN system to find the problem