For V1 owners…how to reprogram your V1
Thread Starter
Senior Member
Joined: Aug 2003
Posts: 334
Likes: 0
From: Irvine, CA
05 E500 Wagon
For V1 owners…how to reprogram your V1
May be old news…was new to me
Just found this…sorry if this has already been beaten to death (or if I'm posting in the wrong spot)…but it was new to me so I’m sure there is someone else out there that may benefit as well / It’s a tech page from the V1 site that shows how to reprogram your V1…as an example I used it to shut off X & K band and now my detector only goes off for Ka & laser. And I also raised the signal strength for Ka
http://valentine1.com/lab/MikesLabRpt3.asp
Just hardwired mine...used one of the posts from the forum to tap power at the cig lighter and picked up ground using a pre-existing bolt by the drivers side fuses...thanks for the great info
Just found this…sorry if this has already been beaten to death (or if I'm posting in the wrong spot)…but it was new to me so I’m sure there is someone else out there that may benefit as well / It’s a tech page from the V1 site that shows how to reprogram your V1…as an example I used it to shut off X & K band and now my detector only goes off for Ka & laser. And I also raised the signal strength for Ka
http://valentine1.com/lab/MikesLabRpt3.asp
Just hardwired mine...used one of the posts from the forum to tap power at the cig lighter and picked up ground using a pre-existing bolt by the drivers side fuses...thanks for the great info
