convenience easy entry!!
I joined recently and have been reading some interesting threads, i haven't posted anything because i didn't have a Mercedes to talk about
but all has changed
bought my self a late 03 E320 cdi
.My question is when i take the key out of the ignition only the steering wheel moves, i have checked the settings and all seems in order
any suggestions?Its booked in to the dealer on thursday
Last edited by evdok; Oct 24, 2006 at 05:07 PM.
Last edited by konigstiger; Oct 24, 2006 at 06:23 PM.
Thanx
1) IC menu – key dependency must be off
2) Exit the vehicle and lock (if the windows or roof are open close all with key)
3) Wait a minute or two then unlock (open windows and roof with key)
4) Exit again (close windows and roof with key)
5) Unlock (leave windows and roof in the closed position)
6) Reset limits by moving the seat forward to the end stop, then to the rear to the end stop (repeat several times)
7) IC menu – reset both steering and seat in Easy/Entry Exit then key dependent to on.
Also, remember to set your second key through the IC menu.
If this doesn’t work you can mention to your dealer: P-B-80.57/38a SEPT06 – Seat Moves to Incorrect Position When Using Easy Entry/Exit Feature. There may be a software error in the Electronic Ignition Switch (EIS).
Last edited by konigstiger; Oct 24, 2006 at 07:31 PM.
Thats the story on the seat. Enjoy the car... they're pretty much fun to drive.
Trending Topics
The Best of Mercedes & AMG
Thanks for replies











