interior part question
Thread Starter
Junior Member
Joined: Jan 2004
Posts: 46
Likes: 0
From: Philly Suburbs - Bucks
2004 E320 / 2007 SL550 / 2008 GL450
interior part question
Does anyone know how I can find out a part number for interior molding? I need to replace the molding (covered in fabric) on the driver side just below the roof. I got INK on it. 
Attached is a picture of the piece - only I need it for the driver sdie.
Thanks!
Attached is a picture of the piece - only I need it for the driver sdie.
Thanks!
Last edited by ilm; Dec 5, 2006 at 08:17 PM. Reason: added picture
Thread Starter
Junior Member
Joined: Jan 2004
Posts: 46
Likes: 0
From: Philly Suburbs - Bucks
2004 E320 / 2007 SL550 / 2008 GL450
Thank you - my car is going in for state inspection next week....we make a stop over at the parts dept. I was just hoping to order over the web and save some $$
MBWorld Fanatic!
Joined: Mar 2004
Posts: 5,017
Likes: 16
From: Ft. Lauderdale Area, USA
2015 ML 350
If its Sharpie ink, denatured alcohol will remove it. Ball point can be removed with brake fluid.... but I would try VM&P Naphtha 1st. (Dab, don't scrub.) What have you got to lose?
You might also consider checking a junk yard for the part. Maybe a car was totalled due to a side or rear hit.
You might also consider checking a junk yard for the part. Maybe a car was totalled due to a side or rear hit.
Last edited by Barry45RPM; Dec 6, 2006 at 10:49 AM.
Thread Starter
Junior Member
Joined: Jan 2004
Posts: 46
Likes: 0
From: Philly Suburbs - Bucks
2004 E320 / 2007 SL550 / 2008 GL450
I tried alcohol - with no luck. It got to the point where the fabric started to come off....so I actually made it worse. UGH!! 
Last edited by ilm; Dec 6, 2006 at 10:12 AM.
Super Member
Joined: Jun 2004
Posts: 996
Likes: 16
From: Tampa, Florida
2017 E300W
