Need Torque values for brake job front and rear
Super Member
Joined: May 2006
Posts: 513
Likes: 2
From: San Diego, CA
2020 GLE350
Oil change:
Oil drain to pan = 10 Nm
Screw cap at oil filter = 25 Nm
Brakes:
Front:
Fixed caliper self locking bolt caliper to knuckle = 115 Nm
Bolt pad wear sensor = 8 Nm
Dust shield locking bolt = 10 Nm
Rear:
Floating caliper guide bolt on caliper support = 28 Nm
Bolt pad contact sensor = 8 Nm
Dust shield locking bolt = 10 Nm
Hope this helps
Oil drain to pan = 10 Nm
Screw cap at oil filter = 25 Nm
Brakes:
Front:
Fixed caliper self locking bolt caliper to knuckle = 115 Nm
Bolt pad wear sensor = 8 Nm
Dust shield locking bolt = 10 Nm
Rear:
Floating caliper guide bolt on caliper support = 28 Nm
Bolt pad contact sensor = 8 Nm
Dust shield locking bolt = 10 Nm
Hope this helps
Thread Starter
Junior Member
Joined: Apr 2005
Posts: 18
Likes: 0
I found some more info, for W211.065 post 9-1-03. floating front calipers,
the caliper to guide pins are 27 n/m
the caliper support is 115 n/m
the pad sensor attach bolt is 8 n/m newton / meters
There are different versions depending on bulid date.
the caliper to guide pins are 27 n/m
the caliper support is 115 n/m
the pad sensor attach bolt is 8 n/m newton / meters
There are different versions depending on bulid date.
