License Plate Lights
10-07-2008, 11:26 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2007
Location: Exit 16E
Posts: 440
Likes: 0
Received 1 Like
on
1 Post
07 E350 4Matic / Sport with P1
License Plate Lights
Has anyone here purchased and installed LED festoon bulbs from AutoLumination? I need to know how their 39mm festoon (presumably the 9 led) fit into the receptacle (and how it compared in size to the OEM).
Thanks...
Thanks...
10-08-2008, 12:37 AM
#2
Member
Join Date: Aug 2007
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
2003 e320
I've used them and they are fine, but mine is an 03 E320. Also, the 39" were kind of too long, so I got 38" instead. Oh, and you need to wire resistors in order for them not to flash off and on and as to not trigger an error warning on the cluster.
10-11-2008, 10:56 AM
#5
Member
Join Date: Jan 2008
Location: bx
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
2004 e320
yea 39 and no issues just take off the inner trunk cover by pulling out the little plugs that hold it in find the plate light wires install the resistors install the bulbs test then bam you got yourself some plate lights
10-13-2008, 04:58 PM
#6
Member
Join Date: Apr 2008
Location: NYC
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
w212
guys will these work in the parking lights and also in the license plate lights instead of wiring in teh resistors becaus ethese are hard wired in but will they fit?
http://www.oznium.com/prewired-superflux
http://www.oznium.com/prewired-superflux
