PIC REQUEST: w211's slammed or lowered :)
MBWorld Fanatic!
Joined: Aug 2011
Posts: 3,184
Likes: 16
From: Highlands Ranch, Colorado
2014 BMW M235i
You have an alignment done afterwards to get it as close to spec as possible? Looks good though. I'd go a little higher in the back or a little lower in the front to match. Definitely agree with 09W211.
Junior Member
Joined: Jan 2013
Posts: 73
Likes: 0
From: 301
2003 W211 E500
It will go lower. I need to get the Ordens on first before I start to fine tune. I doubt I'll change the height independently of front and rear because its lowered the exact same front and rear and I wanted to maintain that aspect.
Junior Member
Joined: Jan 2013
Posts: 73
Likes: 0
From: 301
2003 W211 E500
I'm using the same ordens on the G35 on the previous page. You should pick up the SL's! I still have the brabus rear bumper to put on but I'm still planning out my exhaust.
Super Member
Joined: Apr 2011
Posts: 902
Likes: 3
From: Arizona
W211
That is hella flush as they kids say these days. Careful man you look like your tires are about to shred and it's also illegal and if you scrape the bottom of the car your gas take will explode and your insurance guy will deck you and your mom raised you better than this. 
i'll find the picturespepper that 211 is looking real nice!
Super Member
Joined: Dec 2011
Posts: 872
Likes: 0
2009 W211 E350 AMG Sport PKG
Junior Member
Joined: Jan 2013
Posts: 73
Likes: 0
From: 301
2003 W211 E500
I bored out the holes to 5/8" and I'll be running wobble bolts. I have to rebarrel all 4 wheels since the E sucks for having deep dish. The pic below is the front wheel off of the G (19x9.5 ET -4).
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Super Member
Joined: Apr 2011
Posts: 902
Likes: 3
From: Arizona
W211
Thank you! I got a small question for you. The front hub protrudes out a lot more than the rear. Is there a specific reason for that?
I bored out the holes to 5/8" and I'll be running wobble bolts. I have to rebarrel all 4 wheels since the E sucks for having deep dish. The pic below is the front wheel off of the G (19x9.5 ET -4).
I bored out the holes to 5/8" and I'll be running wobble bolts. I have to rebarrel all 4 wheels since the E sucks for having deep dish. The pic below is the front wheel off of the G (19x9.5 ET -4).
how much poke do you have? depending on low you go the front is def not going to fit... i'm at 9.5 +10 up front and i'm pretty flush but i also gained just under an inch on each with those fenders i had made... and you still have 14mm on me that about another half an inch.. i think the rears you will be ok
Junior Member
Joined: Jan 2013
Posts: 39
Likes: 2
From: Oklahoma
2009 E
MBWorld Fanatic!
Joined: Aug 2011
Posts: 3,184
Likes: 16
From: Highlands Ranch, Colorado
2014 BMW M235i
When I get back from Ecuador (in an Internet Cafe in rural Riobamba right now) I will be going up to MB of Westminster FINALLY after a long time to get the car lowered. Not slammed but just lowered so there is no wheel gap (but no tuck) if that makes sense.
MBWorld Fanatic!
Joined: Jul 2008
Posts: 1,014
Likes: 0
99 W210 E55
Last edited by ulovemybenzo; Apr 2, 2013 at 12:11 PM.
MBWorld Fanatic!
Joined: Jul 2008
Posts: 1,014
Likes: 0
99 W210 E55
Senior Member
Joined: Sep 2003
Posts: 490
Likes: 5
From: OC/SD, CA
EG8 | E46 | W211
OMG...legit!
5x114 with wobble bolts?
5x114 with wobble bolts?
Getting closer...
IMG]https://lh5.googleusercontent.com/-oUCVYzXpQeU/UU4jArinwqI/AAAAAAAAGI0/f1P6XppEmJY/s1095/IMG_00552.jpg[/IMG]
IMG]https://lh4.googleusercontent.com/-GUh5DSLRggs/UU4i8TuHVyI/AAAAAAAAGIc/i1pj0ixKzI4/s821/IMG_00549.jpg[/IMG]
IMG]https://lh6.googleusercontent.com/-pSxLhur5r1g/UU4i_Neqg2I/AAAAAAAAGIs/cJ5jRCu_5Do/s1095/IMG_00551.jpg[/IMG]
IMG]https://lh5.googleusercontent.com/-oUCVYzXpQeU/UU4jArinwqI/AAAAAAAAGI0/f1P6XppEmJY/s1095/IMG_00552.jpg[/IMG]
IMG]https://lh4.googleusercontent.com/-GUh5DSLRggs/UU4i8TuHVyI/AAAAAAAAGIc/i1pj0ixKzI4/s821/IMG_00549.jpg[/IMG]
IMG]https://lh6.googleusercontent.com/-pSxLhur5r1g/UU4i_Neqg2I/AAAAAAAAGIs/cJ5jRCu_5Do/s1095/IMG_00551.jpg[/IMG]
