Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
#251
Former Vendor of MBWorld
Thread Starter
Seems like there are a lot of fans of wagons, so here are pictures of a blue E46 325i wagon / touring that I worked on recently. The owner of this car actually lived down the street from me in Irvine / Orange County, so I dropped by their house to do the vinyl wrap. The owner wanted me to black out his chrome / aluminum window trim. I went with the matte black to give it more of an aggressive look and it went well with all of the other matte black weather rubber pieces that lined the window trim and the overall look of the car.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1793.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1794.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1795.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1796.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1797.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1798.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1793.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1794.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1795.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1796.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1797.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1798.jpg)
-Don Nguyen
donathon@gmail.com
#252
Former Vendor of MBWorld
Thread Starter
Thanks for everyone who was able to make it out to me while I was up in norcal / Bay Area doing vinyl wraps. I only had one car that cancelled on me without any notice (which is a first out of all of my trips that I have been/gone up there), but other than that everything went good as usual.
This was one of the last cars that I did while up there, and I was a bit excited, so I forgot to take some before pictures of it. The owner of this white Subaru STI wagon / hatch brought his car to me to have me vinyl wrap the roof of his car with my gloss black vinyl material. Subarus are one of those cars that can pull off the matte or gloss black look. Since there is no sunroof on this car, it gives it a very smooth and continuous result / look.
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1799.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1800.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1801.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1802.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1803.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1804.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1805.jpg)
-Don Nguyen
donathon@gmail.com
This was one of the last cars that I did while up there, and I was a bit excited, so I forgot to take some before pictures of it. The owner of this white Subaru STI wagon / hatch brought his car to me to have me vinyl wrap the roof of his car with my gloss black vinyl material. Subarus are one of those cars that can pull off the matte or gloss black look. Since there is no sunroof on this car, it gives it a very smooth and continuous result / look.
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1799.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1800.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1801.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1802.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1803.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1804.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1805.jpg)
-Don Nguyen
donathon@gmail.com
#253
Former Vendor of MBWorld
Thread Starter
These aren't the best pictures in the world, since the owner of this car came later in the day and there was a lot of work that he wanted done on his car, so by the time I finished, it was already fairly late in the day. The owner of this car drove from San Diego up to me in Anaheim Hills / Orange County to get the vinyl work done. He wanted me to vinyl wrap his roof, roof spoiler, front splitters, side B pillars, and rear lower bumper diffuser all in the 3M di noc matte carbon fiber vinyl material finish. Personally, I do not like wrapping rear diffusers, but since the owner of this car was getting a lot of other work done, I decided to do it for him/his car.
Front splitters:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1806.jpg)
Roof spoiler:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1807.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1808.jpg)
Rear diffuser:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1809.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1810.jpg)
Roof:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1811.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1812.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1813.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1814.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1815.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1817.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1818.jpg)
Side pillars:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1816.jpg)
-Don Nguyen
donathon@gmail.com
Front splitters:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1806.jpg)
Roof spoiler:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1807.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1808.jpg)
Rear diffuser:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1809.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1810.jpg)
Roof:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1811.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1812.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1813.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1814.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1815.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1817.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1818.jpg)
Side pillars:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1816.jpg)
-Don Nguyen
donathon@gmail.com
#254
Former Vendor of MBWorld
Thread Starter
Another car I did on my most recent trip up to norcal / Bay Area to do vinyl wrapping. I liked this car, because it was a unique color and different from the black or white cars that I am usually working on, so it's a nice change of pace. I believe it was a BMW E90 330i or 328i sedan, and I don't know the exact name of the color of this car, but it was almost greenish/silverish/blueish in different lightings. For this car, we went with the matte black vinyl for his window trim over the gloss black to match the rubber around the window trim and his B pillars, which were also matte black already. I think the final results turned out great. Everything is done seamlessly without any awkward seam lines in random places and everything gets tucked in underneath the weather stripping.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1819.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1820.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1821.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1822.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1823.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1824.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1825.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1826.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1827.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1819.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1820.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1821.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1822.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1823.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1824.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1825.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1826.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1827.jpg)
-Don Nguyen
donathon@gmail.com
#255
Former Vendor of MBWorld
Thread Starter
Went over to my friend's shop (Serge @ BenzWorks in Huntington Beach / Orange County) to tint / smoke the tail lights on this white CLS63 AMG. I only tinted / smoked the clear portion of the tail lights and I left the red alone. This gives the car slightly more character with just the subtle change in shade of the clear portion of the tail lights. It's a fairly light shade, so it almost feels factory looking, so it goes well even on cars that are more lightly modified or more on the stock-ish side.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1828.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1829.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1830.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1831.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1832.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1828.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1829.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1830.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1831.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1832.jpg)
-Don Nguyen
donathon@gmail.com
#256
Former Vendor of MBWorld
Thread Starter
Here's one of the 350z's that I did some vinyl work on while up in the bay area / norcal. The owner of this silver 350z wanted me to vinyl wrap his roof in my gloss black material. His windshield, side windows, and rear windshield were also tinted. He wanted to give it a continuous flow / look from the roof to the front/rear windshield, which is what we got with the final results once everything was done. It looked good. The gloss black matched nicely with the glass.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1833.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1834.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1835.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1836.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1837.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1838.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1839.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1840.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1833.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1834.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1835.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1836.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1837.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1838.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1839.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1840.jpg)
-Don Nguyen
donathon@gmail.com
#257
Former Vendor of MBWorld
Thread Starter
I thought I had posted pictures of this car already, but I guess I haven't yet. This was from my earlier/prior trip to norcal / Bay Area to do vinyl wrapping. The owner of this car originally was only going to have me vinyl wrap his roof in the 3M di-noc carbon fiber material, but he also ended up having me do the top of his trunk with the 3M di noc matte carbon fiber material as well. The hood and rear trunk lip spoiler are real carbon fiber pieces, so that'll give you an idea of how the two compare/matches up. In addition to his roof and trunk, I also wrapped his chrome / brushed aluminum window trim with my matte black vinyl material. I forgot to take more detailed pictures of that, but you can kind of see it in the roof pictures. There were still a couple of bubbles that were working themselves out when I took these pictures, so you may notice it in some of the pictures.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1841.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1842.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1843.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1844.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1845.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1846.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1847.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1848.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1841.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1842.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1843.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1844.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1845.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1846.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1847.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1848.jpg)
-Don Nguyen
donathon@gmail.com
#258
Former Vendor of MBWorld
Thread Starter
Although white cars may look the best with the gloss black roofs, black cars definitely benefit one of the most when it comes to getting their chrome / brushed aluminum window trims blacked out. I believe the owner of this car is also on this forum. The owner of this car brought their jet black E46 325i (or it was a 330i) coupe to have me wrap his window trim in my matte black vinyl material to give it that shadowline look. We went with the matte black to get that slight contrast. Overall, I think it turned out great and changed the look of the car dramatically. Even on a more stock-ish car, doing this still benefits and changes the overall look of the car quite a bit.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1849.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1850.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1851.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1852.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1853.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1854.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1855.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1856.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1857.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1849.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1850.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1851.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1852.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1853.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1854.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1855.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1856.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1857.jpg)
-Don Nguyen
donathon@gmail.com
#259
Former Vendor of MBWorld
Thread Starter
I don't think a lot of people know, but I also have/use a clear yellow transparent film as well. Normally I use this film for fog lights, etc, but the owner of this white 350z wanted to have me wrap the headlights of his car with my transparent yellow vinyl film material. I know this is definitely not for everybody, but this will at least show you what my transparent yellow film looks like. The owner of this car was from around Long Beach I believe and drove out to me in Anaheim Hills / Orange County to get the vinyl work done.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1858.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1859.jpg)
During:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1860.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1861.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1862.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1863.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1858.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1859.jpg)
During:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1860.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1861.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1862.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1863.jpg)
-Don Nguyen
donathon@gmail.com
#260
Former Vendor of MBWorld
Thread Starter
Another car I did in one of my previous trips to norcal / Bay area. The owner of this silver Mercedes Benz CLS65 AMG had me vinyl wrap the roof of his car with the 3M 1080 gloss carbon fiber vinyl material. In addition to the roof, I also vinyl wrapped his chrome window trim with my matte black vinyl. Blacking out the window trim really complimented the roof and also dark colored wheels that the car already had. As comparison, the side B pillars have real carbon fiber overlays on them.
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1864.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1865.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1866.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1867.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1868.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1869.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1870.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1871.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1872.jpg)
-Don Nguyen
donathon@gmail.com
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1864.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1865.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1866.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1867.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1868.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1869.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1870.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1871.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1872.jpg)
-Don Nguyen
donathon@gmail.com
#261
Former Vendor of MBWorld
Thread Starter
The chrome / brushed aluminum on the window trims of this silver BMW E46 325i sedan was starting to fade/oxidize. So instead of buying replacement trim pieces or trying to paint them, the owner of this car had me vinyl wrap them with my matte black vinyl instead. This was a quicker, simpler, and overall better solution. We went with the matte black to match the matte finish on the wheels. I did this car while I was out over at my friend's shop in Huntington Beach / Orange County.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1873.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1874.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1875.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1876.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1877.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1878.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1879.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1873.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1874.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1875.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1876.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1877.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1878.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1879.jpg)
-Don Nguyen
donathon@gmail.com
#262
Former Vendor of MBWorld
Thread Starter
Did the roof of this gray / silver BMW 328i E92 coupe in my gloss black vinyl material. I also vinyl wrapped the chrome / aluminum window trim of this car at the same time, but we went with the matte black finish for that instead of the gloss. The owner of this car was from around Los Angeles / Torrance and drove out to me in Orange County to get the work done. The combination of both the black roof and blacking out the window trim really changed the looks and dynamics of the car quite a bit, even with just those two simple things.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1880.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1881.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1882.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1883.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1884.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1885.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1886.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1887.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1888.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1889.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1890.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1891.jpg)
-Don Nguyen
donathon@gmail.com
#263
Former Vendor of MBWorld
Thread Starter
I had this black Mercedes Benz C63 coupe black series come by to have me tint the clear portion of his tail lights and also black out the chrome / brushed aluminum window trim on his car. For the window trim we went with my matte black material to give it that contrast and more aggressive look and for the tail lights I only tinted / smoked the clear portion of the tail lights. Tinting / smoking only the clear portion gives it a very factory look. Even though my tint / smoke film is already fairly light, this is even a further step closer for being an OEM+ type look for those who are trying to achieve that look.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1892.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1893.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1894.jpg)
Tail lights (Driver (left) side untinted / stock - Passenger (right) side tinted / smoked):
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1895.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1896.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1897.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1898.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1899.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1900.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1901.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1902.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1903.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1892.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1893.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1894.jpg)
Tail lights (Driver (left) side untinted / stock - Passenger (right) side tinted / smoked):
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1895.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1896.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1897.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1898.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1899.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1900.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1901.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1902.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1903.jpg)
-Don Nguyen
donathon@gmail.com
#265
Former Vendor of MBWorld
Thread Starter
No I have not.
I held off using these pictures for a while, since they weren't the best pictures ever, but they are a bit different, so I figured I might as well post them. I am going to post two different cars. The first car, a 2012 black Honda Accord, the owner wanted me to wrap the top chrome grill piece in carbon fiber. Just to make note, the owner supplied their own carbon fiber vinyl material, and I have no idea who the make/manufacturer is. I just know the quality was fairly poor and the adhesive was separating itself from the vinyl from me just sticking it on the surface of the grill once and picking it up again to readjust.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1905.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1906.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1907.jpg)
This second car is quite a bit different from most of the standard set of cars that I am used to having come by. I believe this was something like a 1992 black Acura Legend. The owner of this car wanted me to vinyl wrap the roof of his car with the 3M di-noc matte carbon fiber vinyl material. The roof had some slight paint imperfections/oxidation, and he wanted me to cover over those and also provide a slight change in the look of the car at the same time (originally we were just going to wrap the roof in gloss black). I took these pictures during overcast, so you can't see much details in the weave. However, this kind of provides you guys with an idea of how the vinyl material looks like in low lighting. From further away it looks more matte/flat and then as you get closer you start to see the weaves.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1908.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1909.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1910.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1911.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1912.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1913.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1914.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1915.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1916.jpg)
-Don Nguyen
donathon@gmail.com
I held off using these pictures for a while, since they weren't the best pictures ever, but they are a bit different, so I figured I might as well post them. I am going to post two different cars. The first car, a 2012 black Honda Accord, the owner wanted me to wrap the top chrome grill piece in carbon fiber. Just to make note, the owner supplied their own carbon fiber vinyl material, and I have no idea who the make/manufacturer is. I just know the quality was fairly poor and the adhesive was separating itself from the vinyl from me just sticking it on the surface of the grill once and picking it up again to readjust.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1905.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1906.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1907.jpg)
This second car is quite a bit different from most of the standard set of cars that I am used to having come by. I believe this was something like a 1992 black Acura Legend. The owner of this car wanted me to vinyl wrap the roof of his car with the 3M di-noc matte carbon fiber vinyl material. The roof had some slight paint imperfections/oxidation, and he wanted me to cover over those and also provide a slight change in the look of the car at the same time (originally we were just going to wrap the roof in gloss black). I took these pictures during overcast, so you can't see much details in the weave. However, this kind of provides you guys with an idea of how the vinyl material looks like in low lighting. From further away it looks more matte/flat and then as you get closer you start to see the weaves.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1908.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1909.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1910.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1911.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1912.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1913.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1914.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1915.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1916.jpg)
-Don Nguyen
donathon@gmail.com
#266
Former Vendor of MBWorld
Thread Starter
Here is a new white Toyota / Scion FRS that I vinyl wrapped the roof with my gloss black vinyl material. We went with the gloss black finish to give it a factory look. The owner of this car drove out to me in Anaheim Hills / Orange County to get the roof wrapped.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1917.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1918.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1919.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1920.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1921.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1922.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1923.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1924.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1917.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1918.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1919.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1920.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1921.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1922.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1923.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1924.jpg)
-Don Nguyen
donathon@gmail.com
#267
Former Vendor of MBWorld
Thread Starter
Some of you may notice, I don't necessarily post pictures in any particular order. I just go through what I have and pick from random unless requested otherwise by the owners of the cars or people who want to see something specific.
I worked on this car when I was up in norcal / Bay Area last time. This grey / silver Mercedes Benz came by to have me wrap the chrome / brushed aluminum window trim and rear trunk handle piece with my gloss black vinyl material. In addition to the window trim, I also tinted / smoked the tail lights lightly with my film specifically made/designed for use on exteriors. The lighting kind of makes it hard to really notice the gloss finish on the window trim, but hopefully you can still make it out and get an idea of how it looks like.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1925.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1926.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1927.jpg)
Driver side (left) stock - Passenger side (right) tinted / smoked
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1928.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1929.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1930.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1931.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1932.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1933.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1934.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1935.jpg)
-Don Nguyen
donathon@gmail.com
I worked on this car when I was up in norcal / Bay Area last time. This grey / silver Mercedes Benz came by to have me wrap the chrome / brushed aluminum window trim and rear trunk handle piece with my gloss black vinyl material. In addition to the window trim, I also tinted / smoked the tail lights lightly with my film specifically made/designed for use on exteriors. The lighting kind of makes it hard to really notice the gloss finish on the window trim, but hopefully you can still make it out and get an idea of how it looks like.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1925.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1926.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1927.jpg)
Driver side (left) stock - Passenger side (right) tinted / smoked
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1928.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1929.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1930.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1931.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1932.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1933.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1934.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1935.jpg)
-Don Nguyen
donathon@gmail.com
#268
Former Vendor of MBWorld
Thread Starter
I don't just tint / smoke lights. I also have clear / transparent vinyl film materials that can be used such as red, yellow, etc. I believe the owner of this white Hyundai Genesis coupe was from around Riverside county and drove out to me in Orange County to get his tail lights tinted with my red clear film. He wanted to get rid of the chrome area in the center of his tail lights and to make the tail lights look like they came from the factory a solid red. The end results made a big difference in the appearance of the car. It's probably the simplest and easiest solution that you can do to matching the red of the tail lights.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1936.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1937.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1938.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1939.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1940.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1941.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1936.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1937.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1938.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1939.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1940.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1941.jpg)
-Don Nguyen
donathon@gmail.com
#269
Former Vendor of MBWorld
Thread Starter
Another car that I did while up in norcal / Bay Area. The owner of this red BMW E90 325i sedan had me vinyl wrap his roof in the 3m di-noc matte carbon fiber material. After doing the roof, he decided to have me also lightly tint / smoke his tail lights. Took some pictures of the tail lights inside and also outside to give you an idea of how it looks in different lighting conditions. Everything is custom cut / trimmed to the car, to make sure fitment is perfect and covers the whole / full area unlike pre cut pieces, which usually end up being a bit short around the edges.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1948.jpg)
Driver side (left) stock - Passenger side (right) tinted / smoked:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1949.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1950.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1951.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1952.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1953.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1954.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1942.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1943.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1944.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1945.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1947.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1948.jpg)
Driver side (left) stock - Passenger side (right) tinted / smoked:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1949.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1950.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1951.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1952.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1953.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1954.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1942.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1943.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1944.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1945.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1947.jpg)
-Don Nguyen
donathon@gmail.com
#270
Former Vendor of MBWorld
Thread Starter
This customer was referred to me by his brother whose car I had also wrapped the roof in gloss black. The owner of this new white Porsche Carrera 2 also wanted me to wrap his roof in my gloss black material to give it that panoramic two tone look. He drove out to me in Anaheim Hills / Orange County from around Riverside / Corona area. Unlike most cars, the Porsche has a non glass sunroof, so that piece had to also be wrapped along with the rest of the roof. I think the end results looked awesome and it really made this Porsche look even sportier without giving it too much of an aftermarket / overdone feel that other modifications can cause.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1955.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1956.jpg)
Just for fun, to see how the car would have looked like if it had a glass sunroof:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1957.jpg)
Back to business, here are the end results:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1958.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1959.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1960.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1961.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1955.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1956.jpg)
Just for fun, to see how the car would have looked like if it had a glass sunroof:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1957.jpg)
Back to business, here are the end results:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1958.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1959.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1960.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1961.jpg)
-Don Nguyen
donathon@gmail.com
#271
Former Vendor of MBWorld
Thread Starter
Here is a brand new white Audi B8 A4 that I blacked out the chrome / brushed aluminum window trim with my gloss black material. The owner of this car went with gloss black over the matte black so it'd blend in with his tinted windows. The chrome is a small detail, but even on a lighter colored car like this white Audi, it still makes an immense difference in the overall look of the car. I believe the owner of this car was from around Orange County or Los Angeles. The gloss black window trim makes the car look sportier and classy at the same time, without ruining the factory look.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1962.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1963.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1964.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1965.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1966.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1967.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1968.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1962.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1963.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1964.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1965.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1966.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1967.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1968.jpg)
-Don Nguyen
donathon@gmail.com
#272
Former Vendor of MBWorld
Thread Starter
The owner of this car was also in Orange County and brought me by his CLS63 to have me lightly tint / smoke the clear section of the tail lights. I had previous blacked out his chrome / brushed aluminum window trim in matte black, which you can kind of see in the corner pictures and on the rear trunk handle piece. Even though this car was fairly blacked out, we only tinted the clear portion of the tail lights instead of the whole thing, which gave it a nice subtle touch. For comparison, if you look in the background, my X5's tail lights are completely tinted with the same shade/material.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1969.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1970.jpg)
During:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1971.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1972.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1973.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1969.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1970.jpg)
During:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1971.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1972.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1973.jpg)
-Don Nguyen
donathon@gmail.com
#273
Former Vendor of MBWorld
Thread Starter
This is probably my shortest picture post ever in recent times. I had worked on this car probably 1-2 years ago, but I haven't posted any pictures my work on Subarus in a while, so I decided to use these pictures anyways. The owner of this white Subaru hatchback / wagon actually lived right down the street from me in Irvine / Orange County, so I just came by his place to vinyl wrap his roof in my gloss black vinyl material. Part of the reason for him wanting to wrap his roof was to also protect it for when he had a roof rack on and put snowboards, etc, on there. Pictures aren't the best, but hopefully you guys can still see and get an idea.
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1974.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1975.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1976.jpg)
-Don Nguyen
donathon@gmail.com
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1974.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1975.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1976.jpg)
-Don Nguyen
donathon@gmail.com
#274
Former Vendor of MBWorld
Thread Starter
Replied.
Here is a silver E92 328i coupe that I blacked out the chrome / brushed aluminum window trim with my matte black vinyl material. The car was relatively stock, but getting rid of the chrome still made a big difference on the overall look of the car. We went with the matte black over the gloss black to match the other matte pieces that were already around the window trim. The owner of this car drove out to me from around Long beach to Anaheim Hills.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1977.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1978.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1979.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1980.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1981.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1982.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1983.jpg)
-Don Nguyen
donathon@gmail.com
Here is a silver E92 328i coupe that I blacked out the chrome / brushed aluminum window trim with my matte black vinyl material. The car was relatively stock, but getting rid of the chrome still made a big difference on the overall look of the car. We went with the matte black over the gloss black to match the other matte pieces that were already around the window trim. The owner of this car drove out to me from around Long beach to Anaheim Hills.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1977.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1978.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1979.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1980.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1981.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1982.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1983.jpg)
-Don Nguyen
donathon@gmail.com
#275
Former Vendor of MBWorld
Thread Starter
I had done this white Honda Insight before, but in gloss black. The owner decided to change it up and had me redo his roof in the 3M di-noc matte carbon fiber material this time around. The owner of this car was from around Long Beach and drove out to me in Anaheim Hills / Orange County to have the vinyl work done. The roof was fairly big and had an antenna and rear windshield nozzle right next to it that I had to work around, but everything came out looking good. I've had people ask me if I can wrap mirrors. Yes, I can wrap mirrors, however, it's not so much if I can wrap them, but if the material can can maintain that shape/contours of the piece being wrapped.
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1984.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1985.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1986.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1987.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1988.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1989.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1990.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1991.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1992.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1993.jpg)
-Don Nguyen
donathon@gmail.com
Before:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1984.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1985.jpg)
After:
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1986.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1987.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1988.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1989.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1990.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1991.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1992.jpg)
![](http://wannaberacer.com/vinylwrapping/vinylroofwrap1993.jpg)
-Don Nguyen
donathon@gmail.com