Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here are some pictures of a new black BMW F10 5 series that I vinyl'd the chrome window trim with my matte black material to resemble the BMW factory shadowline trim look. I had some people ask for some closer up pictures of the wrap around the edges, so here they are. Let me know if you guys have any questions or other picture requests.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I had some requests for some more eye level angles, so I mixed those in with some of the higher angle ones to help you guys better visualize what it looks like. I usually get a lot of white and black cars coming by to get vinyl work done, so it's always different when other colored cars come by to get some vinyl work done. I think this is probably the second or third yellow car that I have had come by. The owner of this car was from around Cerritos and came out to me in Anaheim Hills to get the vinyl work done. We went with the gloss black to match the lips/finish on the wheels.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
How much of a difference does blacking out your chrome window trim make?
This much of a difference.
After:
-Don
donathon@gmail.com
This much of a difference.
After:
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is not a car that I personally worked on. This car belongs to one of my customers that installed the vinyl wrap himself for his roof. I asked him for these pictures, because this is the flat black material, which is not to be confused with the matte black that you see in all of my other pictures. I've had this flat black material for a while now, but I never had requests for it, so I never got around to using it myself.
I don't have many pictures of it, but hopefully these will be enough to sort of give you guys an idea of how it looks like on a car.
-Don
donathon@gmail.com
I don't have many pictures of it, but hopefully these will be enough to sort of give you guys an idea of how it looks like on a car.
-Don
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here is a black BMW E90 335i that I vinyl wrapped the roof with the 3M di-noc carbon fiber material. The owner of this car was from around the LA area and drove out to me in Orange County to have the vinyl work done. I had also vinyl wrapped his window trim in matte black a while back as well. It's not very noticeable in the pictures, but the mirror caps were real carbon fiber, as a reference point for how the vinyl compares to real carbon.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
Out Of Control!!
Joined: Jun 2008
Posts: 10,557
Likes: 24
From: Earth
Porsche Macan S SportDesign / Ex M-B's: 11 & 10 & 06 E350's, 02 S500
Don, do you also use the alternate type of CF wrap that 3M started manufacturing more recently? I think it might be the "Scotchprint" line but not sure if that's the one I'm referring to.
I looked it up and heard that 3M stated that is a newer "tech" for the wraps, and is supposed to be more durable. I think that it might only come in the "gloss" look and also the weaves are smaller than the Di-Noc print.
I looked it up and heard that 3M stated that is a newer "tech" for the wraps, and is supposed to be more durable. I think that it might only come in the "gloss" look and also the weaves are smaller than the Di-Noc print.
MB World Stories
The Best of Mercedes & AMG
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here is a brand new silver Mercedes E63 sedan that I vinyl wrapped both the roof and the chrome window trim + trunk handle on the rear. For the roof, we went with a gloss black vinyl wrap finish to give it a panoramic or gloss black painted look. In addition to the roof, the side roof rails were also wrapped in gloss black, which on this car extends from the bottom of the windshield to the back of the roof. On the window trim, we went with the matte black vinyl wrap finish over the gloss black in this case, to give it a nice contrast and have it blend in with the rubber that's also around the window trim pieces. It makes the window trim pop a bit more versus just completely blending in with the windows, if that makes sense.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this car contacted me to see if I could wrap the fading back pillars on his black Mercedes SLK. He decided to go with the 3M di-noc carbon fiber material for this, to give it a nice contrast and at the same time hide/cover up the peeling/fading black pieces. The owner of this car was actually just up the street from me in Anaheim Hills.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is the same black Mercedes SLK as above that I vinyl wrapped the pillars in the 3M di-noc carbon fiber material. I also tinted / smoked the clear portions of the tail lights on his SLK. This is my current/new shade that I am using, which is lighter than before and really gives a fairly factory look similar to BMW's black line tail lights, for those who are familiar. The owner of this car was also in Orange County/Anaheim Hills.
Before:
Left side tinted / smoked, right side untinted / unsmoked.
Tinted/smoked
Untinted/unsmoked
-Don Nguyen
donathon@gmail.com
Before:
Left side tinted / smoked, right side untinted / unsmoked.
Tinted/smoked
Untinted/unsmoked
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here is a black Mercedes W204 C300 or C350, I don't remember, since it was debaged. I vinyl wrapped the chrome or brushed aluminum window trims with my gloss black vinyl material to give it that shadowline blacked out look. For this car, we went with the gloss black material over the matte black material. We did this so that the window trim would blend in with the car more, since his tail lights were tinted fairly dark (making then look like gloss black) and his wheels had some gloss black accents on it as well. I also blacked out the chrome trunk handle in the rear to complete the entire chrome blacking our look/process.
In addition to the window trim, I also did the top half portion of the side mirror blinkers in gloss black. I basically covered the reflector portion and left the actual indicator portion visible/clear.
Before:
After:
-Don Nguyen
donathon@gmail.com
In addition to the window trim, I also did the top half portion of the side mirror blinkers in gloss black. I basically covered the reflector portion and left the actual indicator portion visible/clear.
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I've had a few people ask me what a gloss black vinyl wrapped roof would look like on a more stock/factory looking car. I vinyl wrapped the roof of this white BMW E46 325i sedan in my gloss black vinyl material. For this particular car, if the owner of this car was to have keep this car as is, without doing too many other mods, gloss black would definitely be the correct choice over matte black or carbon fiber, etc. Those finishes would be too aggressive for the car. Don't mind the pink emblems. This car was owned by a girl. The owner of this car drove out to me from Irvine/Orange County.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here is an imola red BMW E46 M3 that had me vinyl wrap his roof with the 3M 1080 gloss carbon fiber material. I tried to take more pictures to try and help show the differences between carbon fiber weaves in the 3M 1080 vs the 3M di-noc material. I believe the owner of this car was from San Diego and came up to me in Orange County to have the vinyl work done. The weave in the 1080 material is a lot smaller/finer, and due to the nature of the material, it comes out wavier than the dinoc material.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Tinted / smoked the headlights on this new white C250 Mercedes sedan with the new lighter shade of tint that I have been using. The darkness of this tint is about half of other tint shade that I used to use. This shade of tint is light enough to still allow a good amount of light through it, so that not too much light output is reduced, but it is still dark enough that it still tones down the head lights / tail lights that it is being applied to. The owner of this car came out to me from around Corona to Orange County / Anaheim Hills to get the vinyl work done. I also blacked out the chrome and the roof on this same car.
Before - Untinted/unsmoked on passenger side, tinted/smoked on driver side:
Untinted/unsmoked:
Tinted/smoked:
After:
-Don Nguyen
donathon@gmail.com
Before - Untinted/unsmoked on passenger side, tinted/smoked on driver side:
Untinted/unsmoked:
Tinted/smoked:
After:
-Don Nguyen
donathon@gmail.com
Senior Member
Joined: Aug 2011
Posts: 356
Likes: 19
From: RI
2017 S550 4matic
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Who said you couldn't modify wagons? Here is a brand new white Mercedes E63 AMG wagon that I vinyl wrapped the factory chrome or brushed aluminum window trim with my matte black vinyl material. In addition to the chrome window trim, I also blacked out the rear chrome trunk handle piece to complete the look. The owner of this car was local to me in Orange County. It made a big difference as you can see from the before/after pictures. Getting rid of the chrome made the car look a lot more solid and really pulled the car together. Completely changed the look/stance of the car in my opinion.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Brand new alpine white BMW 550i F10 sedan, less than a week old. The owner of this car had me vinyl wrap the roof of his F10 in gloss black including the side roof rails on his car. The antenna was painted gloss jet black to match the roof. This car came out to me to from Buena Park area to Anaheim Hills/Orange County to get the work done. I think the gloss black roof really suited this bigger body car very well, especially with the black trunk spoiler and darker gunmetal wheels. The car came with the sport package factory shadowline trim from the factory already, so that match fairly well with the roof as well.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Somewhat more recently, I had this titanium silver BMW E46 330i ZHP sedan come by to have me vinyl wrap the roof of his car with the 3M di-noc matte carbon fiber vinyl material for him. I think this is the first E46 or even BMW in general that I have worked on that did not have a sunroof, which was pretty cool. As you can see in the pictures, both the side roof rails were wrapped along with the roof for this car. The owner of this car was from around the Los Angeles county and came out to me in Orange County / Anaheim Hills to get it done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Again, this is the new lighter shade of tint/smoke film that I am using. This is not regular normal window tint. This material is designed to be used on the exteriors of cars. I tinted / smoked the tail lights on this darker gray gunmetal colored new E350 sedan. We decided to go with covering the entire tail light to give it a consistent finish over the whole tail light versus just tinting the clear or red section on this car. The owner of this car was from around Newport Beach area and came out to me in Anaheim Hills to get the work done. It's not often that I get non white cars, so this will help out those who have similar colored cars and were thinking about getting their tails smoked or tinted and how it'd look. I also took some pictures inside and outside, to show the differences of how the shade looks in different lighting conditions.
Before:
Driver side tinted/smoked - Passenger side untinted/unsmoked.
After:
-Don Nguyen
donathon@gmail.com
Before:
Driver side tinted/smoked - Passenger side untinted/unsmoked.
After:
-Don Nguyen
donathon@gmail.com
