ErlingManuel

Hi forum friends I have a problem with a 2004 mercedes e320 happens if it was from my father recently died, the car was in the house kept it decided turn to warm, then the car will not start, to check the car has damaged the fuel pump and fuel sending apparently broken in the hose that goes to the inyectore been checking it on the web to buy the filter and the fuel pump but I have a problem is that the pump everything right in order that i found a good original price but not doing the work the fact is that with the fuel sending my part number is 211 470 15 41 but apparently that part number is discarded and is now used 211 470 4094 but I have fear buy because the connectors do not look at anything I read you have to use some adapters and let me know how easy it is to connect with aDAPTERS, I'll post the part number I need to connect the fuel sending would check it right thanks

adapter 211 440 05 07

211 471 12 41


mi old fuel sending

http://postimg.org/image/qqbpn0m1h/5170dbb6/

and the new fuel sending

http://postimg.org/image/rya50uc1r/bc47d0f5/
sorry for my english salut from dominican republic

Plutoe

What is the VIN

ErlingManuel

Hi mi vin number is
WDBUF65J74A521218



thanx you

konigstiger

http://www.benzworld.org/forums/w211...gas-smell.html

Attachment confirms part #s are correct in addition, took the liberty of attaching vehicle datacard.

Plutoe

I think you may have confused a couple of very complicated fuel tank parts. A very important point for you to remember is that your VIN indicates a fuel tank code494.

That being the case you have the correct "Fuel level sensor and fuel filter" number 211 470 40 94.

What is missing is the "Fuel pressure sensor" number 163 542 28 13.


The tank and parts are very complicated therefore let the dealer define the parts with your VIN---then you can buy elsewhere

PS: The above post regrettably is for a fuel tank code 917-------------you do not have that----you have code 494!!!

ErlingManuel

Thanks for the help all parts confirmed right now I have a doubt the connector 211 440 05 07 as the wire is connected to the car since my car does not have the connecting plug that goes to the ecu the car would have to cut the wires and splice the wires from under the seats ..

assemble the pump and filter so complicated no dealer in my country wants 2500 dollars, which is harder to get the hose in the tank with a wire but can only make a guide and guide the wire

As Electric Splice connector of the wire under the seat coming .. color to color ... or if you have any diagram I would appreciate my car tieen not entering the adapter plug

Need recalibrate the sending unit? how can i do that..?

I have not got this plug that goes into the car where the wire connects to the ecu

http://postimg.org/image/5xbd7ptdp/

ErlingManuel

The leak of my car

http://postimg.org/image/8n1qrgl09/9097b1fb/